manualshive.com logo in svg

ABB TCC300, User Manual, Page: 98 / 716

Share
Download
ABB TCC300 User Manual Download Page 98

3.13.2 

Calibrating tap position from the HMI

1.

Navigate to the "Tap Position/Cal" screen in the Monitor/Tap Information menu.

2.

Press the ENT pushbutton. If prompted, enter a valid Level 2 Access Code.

3.

At the cursor, input the desired Tap Position utilizing arrow pushbuttons, then press
the ENT pushbutton. The display will return to the "Tap Position/Cal" screen.

3.14 

Drag hands

3.14.1 

Resetting drag hands values from the HMI

1.

Navigate to the "Drag Hands" screen in the Monitor/Tap Information menu.
The presence of the "E" on the top line of the display indicates that the Drag Hands
values can be reset from this menu item.

2.

Press the ENT pushbutton. The displayed "E" will change to a "R".

3.

Press the ENT pushbutton. The control will display the following.

Drag Hands R Press ENT to confirm

4.

Press the ENT pushbutton. The control will display the following.

Drag Hands L=0N R=0N

The Drag Hands values are now reset to the current value.

3.14.2 

Resetting drag hands values from TCC600

1.

Select 

Setup/Tap Settings

 from the TCC600 toolbar. TCC600 will display the Tap

Settings dialog screen.

2.

From the "Drag Hands" section of the Tap Settings dialog screen select "Reset".

3.

Select 

Save

. TCC600 will display a "Save to Device" confirmation screen.

4.

Select 

OK

. TCC600 will display a Setpoints "Successfully Written to Control"

confirmation screen.
The Drag Hands values will be reset to the current value.

Section 3

1VAC388793-MB A

Operation

92

TCC300

User Manual

Summary of Contents for TCC300













































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments