ABB TCC300, User Manual, Page: 349 / 716

GUID-F30E8D82-95A5-4460-AAEE-BBCD9FAD3FEB V1 EN
Figure 267: Setpoints Successfully Written To The Control Dialog Screen
6.2.3.8 Presetting the Presettable Operation Counters from the HMI
The Operation, Neutral, Lower and Raise Counters operate with the selected count
method (X1, X2, Count Window or Cam Follower). It provides the user with the ability
to preset a value up to 999,999. The counters will increment from the preset value based
on the selected count method.
1. Press the Down Arrow (CNFG Hot Button) pushbutton to wake the unit. The menu
will advance to "CONFIGURATION".
2. Press the Down Arrow pushbutton once. The unit will display the following:
Tapchanger Type
3. Press the Right or Left arrow pushbutton, as necessary, to navigate to the "Tap
Settings" menu.
4. Press the Down arrow pushbutton, as necessary, until the "Op Counter Preset"
screen is displayed.
5. Press the ENT pushbutton. If prompted, enter a valid Level 2 Access Code. The
following will be displayed:
Op Counter Preset
000000 C
6. Utilizing the arrow pushbuttons enter the desired Operations Counter Preset value
from 0 to 999,999, then press the ENT pushbutton.
6.2.3.9 Presetting the Presettable Operation Counters from TCC600
To Preset the Operation and/or Neutral Counter from TCC600®, perform the following:
1. Select Setup/Tap Settings from the TCC600 toolbar. TCC600 will display the Tap
Settings dialog screen.
1VAC388793-MB A
Section 6
Configuration
TCC300 343
User Manual