ABB TCC300, User Manual, Page: 693 / 716

4. Retransmit after 16 ms with TAL = 16
5. Retransmit after 32 ms with TAL = 32
6. Retransmit after 64 ms with TAL = 64
And so on until a maximum of 65535/2 ms after which it repeats at a fixed interval of
32765 ms.
GOOSE Publisher
The user can configure up to 5 generic goose control blocks. All the GOOSE publishers
should have the different mac addresses. The user can select a total of 16 data attributes for
each dataset referenced in the goose control block. The Trigger options can be periodic or
data change or both.
The user can also select the trigger options for any member in the dataset. The available
periodic change for which the goose can be generated is 250 ms - 5000000 ms.
GOOSE Subscriber
The user can configure up to 2 generic goose control blocks. All the GOOSE subscribers
should have different mac addresses. The user can select a total of 255 data attributes for
each dataset referenced in the goose control block. In the 255 attributes one has to be a
command. The list of commands supported include:
• Operation Counter Reset
• Drag Hands Reset
• Block Auto Via Comm
• Voltage Reduction 1
• Voltage Reduction 2
• Voltage Reduction 3
• Tap Position
• Tap Change
• Clear Motor Seal-In Alarm
• Clear Master Follower LockOut Alarm
The user publishing the goose message should configure the appropriate command and its
appropriate position in the dataset and configure the remaining data attributes
GsSubscOfs (Offset) in the dataset referenced in the goose subscription control block.
GOOSE Parameters (Publisher/Subscriber)
DSRef
Contains the object reference of the members of the dataset whose members of the dataset
will be transmitted.
1VAC388793-MB A
Section 13
Appendix D IEC 61850 Configuration Editor
TCC300 687
User Manual