ABB TCC300, User Manual, Page: 272 / 716

total record before re-arming for the next record. For example, a setting of 80% will
result in a record with 20% pre trigger data, and 80% post-trigger data.
• Inputs and Outputs – The recorder can be triggered remotely through serial
communications using TCC600, or automatically, using programmed status signals.
Table 54: Recorder Partitions and Cycles for 16 Samples/Cycle
Number of partitions Cycles per partition
1 1365
2 910
3 682
4 546
5 455
6 390
7 341
8 303
9 273
10 248
11 227
12 210
13 195
14 182
15 170
16 160
5.2.1 Setting up the oscillograph recorder
Communication must be established with the target control for this
procedure. When not connected to the control, the Send selection does not
save the Oscillograph Recorder settings to an open file.
1. From the TCC600® Main Screen menu, select Setup/Oscillograph/Setup .
TCC600 will display the Oscillograph Setup dialog screen.
Section 5
1VAC388793-MB A
System setup
266 TCC300
User Manual