ABB TCC300, User Manual, Page: 159 / 716

Item Description
Watts Displays the calculated primary quantity based on
the user-selected voltage and current multipliers; VT
configuration (line-to-line or line-to-ground), single-
phase or three-phase, and measured secondary
voltage and current.
VAr Displays the calculated primary quantity based on
the user-selected voltage and current multipliers, VT
configuration (line-to-line or line-to-ground), single-
phase or three-phase, and measured secondary
voltage and current.
VA Displays the calculated primary quantity based on
the user-selected voltage and current multipliers, VT
configuration (line-to-line or line-to-ground), single-
phase or three-phase, and measured secondary
voltage and current.
Table 11: REMOTE VOLTAGE BIAS
Item Description
Voltage Displays the Remote Voltage value provided to the
control utilizing either DNP 3.0, MODBUS or IEC
61850 protocols. If a voltage value is present the
control is utilizing the Remote Voltage Bias Voltage
to control.
Table 12: SECONDARY STATUS
Item Description
Load Voltage Displays the real-time measured value of voltage at
the regulator or transformer and includes any
corrections made using the user‑selected VT
correction voltage.
Meter Out Voltage Displays the measured voltage at the terminals of the
TCC300 without any software modifications. Used
as the base for normalizing voltage.
Source Voltage Displays the calculated primary source voltage
based on the user selected source voltage multiplier,
source VT corrections and source secondary
voltage.
Compensated Voltage Displays the calculated voltage at the "load center".
Normalizing Voltage A Normalizing Voltage Multiplier with a range of 0.80
to 1.20 is available to be applied to Meter Out Voltage
and displayed in real time as Normalizing Voltage.
Load Current Displays the real-time measured value of current.
Power Factor Displays the real-time calculated value of power
factor.
Table continues on next page
1VAC388793-MB A
Section 4
TCC600
TCC300 153
User Manual