ABB TCC300, User Manual, Page: 634 / 716

• - 4.0 = I
rc
• 50 %
• - 2.0 = I
rc
• 75 %
• 0.0 = I
rc
• 100 %
• +2.0 = I
rc
• 150 %
• +4.0 = I
rc
• 200 %
DVAR2 Reac I Lmt
200.0 mA
The Reactive Circulating Current Limit is the maximum Delta VAr value allowed for
bandcenter adjustment. Range and units are dependent on the CT installed in the unit:
Table 71:
CT Rating Range Units
200 mA 5...200 mA
1 A 0.02...1.00 A
5 A 0.1...5.0 A
Topology
SINGLE BUS
Single Bus, Ring Bus or Double Bus topologies may be selected.
Paralleling Address
16
The unique address for each device (Range 1 – 16).
The Initiator Paralleling Address must be the highest address in the network. All Non-
Initiator addresses must be a value less than the Initiator.
The control's position in the paralleling network is determined by its paralleling address.
Position 1 should be assigned a paralleling address of 1, Position 2 a paralleling address
of 2 and so on, in an ascending order.
Num. Devices
2
The total number of devices in the paralleling scheme (maximum 16).
P2P Update Speed
Section 10
1VAC388793-MB A
Appendix A HMI
628 TCC300
User Manual