ABB TCC300, User Manual, Page: 68 / 716

3.6.1.2 Accessing the status screens from the HMI
1. Press the Left Arrow (MNTR Hot Button) pushbutton to awaken the unit. The menu
will advance to "MONITOR".
2. Press the Down Arrow pushbutton once. The unit will display the following:
Metering
3. Press the Right or Left arrow pushbutton as necessary to navigate to the "Status"
screen.
4. Press the Down arrow pushbutton once. The menu will advance to the first status
element (Tapchanger Status) of the Status groups.
The status groups can be accessed by continuing to press the Down pushbutton within the
Status menu and then pressing ENT to view.
The Status screens consist of four individual status groups that include:
• Tapchanger Status
• Alarm Status
• Input Status
• Output Status
3.6.1.3 Accessing the tapchanger status screens from the HMI
1. Navigate to the "Tapchanger Status" screen.
Press ENT to view Tapchanger Status
2. Press the ENT pushbutton. The control will display a summary of the Tapchanger
Status parameters.
•
TAP = Tap Position
[1]
• BDS = Band Status
• PWR = Power Direction
• BLK = Blocks In Effect
• VRD = Voltage Reduction
3. To cycle through each element of the "Tapchanger Status" display press the Down
arrow pushbutton.
[1] In order to verify Neutral Tap Position, when the tap position is "0", but no neutral input is detected, the Tap Position screen will display "- - -"
instead of "0".
Section 3
1VAC388793-MB A
Operation
62 TCC300
User Manual