ABB TCC300, User Manual, Page: 708 / 716

GUID-7AEB4B87-0310-4AA6-9E25-424DC96615C7 V1 EN
Figure 481: Remote Ethernet File Update Utility (Data File) Dialog Screen
4. Select "Choose File" for the file(s) to be updated. The utility will prompt for the
desired file location and file name.
5. Select the desired file. The utility will populate the "DNP Configuration" field with
the path/file name.
6. Enter the IP Address and the Serial Number of the control to be updated.
7. Select "Add". The information will be added to the list of controls to be updated.
Repeat Step 6 for any other controls to be updated.
The user can create a list of controls that will have their data files updated. This list
can be saved if desired and can be retrieved for use at a later date. The list of controls
and their associated information (except for the "Update to Version") is stored in an
encrypted format.
8. From the Settings dropdown menu select the number of "Retries" to be attempted if
there is any failure to update the data files on any control.
The maximum number of retries is 10. The default number of retries is 3. The range
is from 0 to 10.
9. Select the controls to be updated.
10. Select the desired file types to be updated on each individual control.
11. Select either "Update Selected" or "Update All" to start the update sequence.
Section 15
1VAC388793-MB A
Appendix F Remote Ethernet file update utility
702 TCC300
User Manual