ABB IRB 1200 Page 311 Product Manual Download

Page: 311 / 906

Note

Article number

Spare part

Not used with protection class
IP40.
Replace if damaged.

3HAC056727-001 /
3HAC080705-001

Gasket on swing cover

Includes brackets, sheets, dis-
tance screws, plastics, cable
clamp, seal bolts and air protec-
tion in tubular.

3HAC049663-001

Cable harness material set

Replace if damaged.

3HAC059684-001

Housing small cover

Used with protection type Clean
Room.
Used for robots with food grade
lubrication.
Used with protection type Hy-
gienic.
Replace if damaged.

3HAC056142-001

Housing small cover, Clean
Room
Housing small cover, food grade
lubrication
Housing small cover, Hygienic

Not used with protection class
IP40.
Replace if damaged.

3HAC056724-001 /
3HAC080702-001

Gasket on cable housing cover

Replace if damaged.

3HAC044660-001

PTFE film on cable housing
cover

Not used with protection class
IP40.
Replace if damaged.

3HAC058822-001 /
3HAC080709-001

Gasket for tubular cover

Not used with protection class
IP40.
Replace if damaged.

3HAC056707-001 /
3HAC080701-001

Gasket for tubular cable housing
cover

Not used with protection class
IP40.
Replace if damaged.

3HAC056698-001 /
3HAC080700-001

Housing cover gasket (IRB
1200-7/0.7 )

Not used with protection class
IP40.
Replace if damaged.

3HAC056697-001 /
3HAC080699-001

Housing cover gasket (IRB
1200-5/0.9 )

Includes tubular flange, air con-
nectors and seal bolts.
Replace if damaged.

3HAC049664-001

Air connector set with Ethernet
hole in flange

Includes tubular flange, air con-
nectors and seal bolts.
Replace if damaged.

3HAC049665-001

Air connector set without Ether-
net hole in flange

Used with protection type Hy-
gienic.
Includes Ethernet connector, air
connectors, CP/CS connector
and gasket (3HAC078804-001).

3HAC079691-001

Plate with connector set

Used with protection type Hy-
gienic.
Includes gasket (3HAC078804-
001).

3HAC078810-001

Plate without connector set

Used with protection type Hy-
gienic.
Replace if damage.

3HAC078804-001

Gasket

Continues on next page

Product manual - IRB 1200

311

3HAC046983-001 Revision: S

4 Repair

4.4.1 Replacing the lower arm

Continued

Summary of Contents for IRB 1200










































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IRB 1200

Reviews:

Related manuals for IRB 1200

Brands by name

Popular brands

ABB IRB 1200, Product Manual

Search results

Summary of Contents for IRB 1200

Reviews:

Related manuals for IRB 1200

Brands by name

Popular brands