ABB IRB 1200 Page 13 Product Manual Download

Page: 13 / 906

Description

Revision

Changes made in this revision

•

Flange sealing changed from

12340011-116 Loctite 574

3HAC026759-002 Sikaflex-521FC

for small cover on the housing,

see

Replacing the axis-4 FPC unit, housing extender unit and

housing extender sealings on page 245

•

Tightening torque for attachment screws on lifting accessories is
changed from 40 Nm to 15 Nm.

•

Tightening torque for lower arm cable

•

Tightening torque for the axis-4 FPC unit attachment screws is
changed from 1.5 Nm to 0.3 Nm.

•

Added a tightening torque for the attachment screws of the axis-
1 calibration stop pin and the axis-1 calibration pin.

•

Added a caution note to keep a straight line when fitting the axis-
1 calibration pin.

•

Article number of grease harmonic grease 4B No. 2 changed from
3HAC031695-001 to 3HAC037302-001.

•

Total amount of harmonic grease 4B No.2 for axis 2 and axis 5
changed from 80 g and 12 g to 60 g and 9 g, respectively,

•

Maximum revolution of axis 6 corrected to ±242°, see

Working

range on page 61

•

Clean Room option added.

•

Food grade lubrication option added.

•

Spare part numbers for several gaskets (IP67) updated.

•

The base, the swing and the axis-1 sealing ring are updated due
to IP67 improvements

Published in release R16.2. The following updates are done in this revi-
sion:

•

New standard calibration method introduced (Axis Calibration).
See

Calibration on page 805

•

Information about grounding point is added, see

Grounding and

bonding point on manipulator on page 108

•

Foundry Plus option added.

Published in release R17.1. The following updates are done in this revi-
sion:

•

A new standard IEC 61340-5-1:2010 added. See

Applicable

standards on page 884

•

V-ring on axis-1 sealing ring version 3HAC058568-001 added as
a spare part.

•

Notes added for spare part versions. See

Description of spare

part versions on page 874

•

Information about Type B robots supporting SafeMove 2 added.

•

Plug on base added to options IP67 and Foundry Plus.

Continues on next page

Product manual - IRB 1200

3HAC046983-001 Revision: S

Overview of this manual

Continued

Summary of Contents for IRB 1200










































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IRB 1200

Reviews:

Related manuals for IRB 1200

Brands by name

Popular brands

ABB IRB 1200, Product Manual

Search results

Summary of Contents for IRB 1200

Reviews:

Related manuals for IRB 1200

Brands by name

Popular brands