ABB IRB 1200 Page 208 Product Manual Download

Page: 208 / 906

Note

Action

Tightening torque: 1.5 Nm.

xx1300002438

Refit the axis-1 sealing ring to the swing and
carefully run the cabling into the swing.

For information on which sealing ring to be ordered, see

Spare part versions for the axis-1 sealing

ring on IP40/IP67 robots on page 878

Assembling the swing and base

Note

Action

For robots with protection type Clean
Room

For robots with food grade lubrication
For robots with protection type Hygienic

Clean the joints that have been opened and
wipe the parts free from particles with
spirit on a lint free.

Radial sealing with dust lip: 3HAB3701-47

Check the axis-1 radial sealing in the base.

M2 variseal sealing: 3HAC044641-002

xx1400000472

Replace if damaged.

Note

For robots with protection type Clean
Room
For robots with food grade lubrication
For robots with protection type Hygienic

Apply a little grease to the sealing when
replacing the radial sealing and wipe clean
after the replacement.

For robots with protection class IP67

Check the M2 variseal sealing in the base.

Replacement is detailed in

Replacing the

base spare parts (base, axis-1 radial seal-
ing, protection sleeve) on page 492

Replace if damaged.
The M2 variseal sealing is only installed on
base version 3HAC049628-001. See

Spare

part versions for the base on IP40/IP67 ro-
bots on page 874

CAUTION

Do not fit M2 variseal sealing on robots in
other protection class or protection types.

Continues on next page

208

Product manual - IRB 1200

3HAC046983-001 Revision: S

4 Repair

4.3.1 Replacing the main cable package

Continued

Summary of Contents for IRB 1200










































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IRB 1200

Reviews:

Related manuals for IRB 1200

Brands by name

Popular brands

ABB IRB 1200, Product Manual

Search results

Summary of Contents for IRB 1200

Reviews:

Related manuals for IRB 1200

Brands by name

Popular brands