ABB IRB 1200, Product Manual

Page: 652 / 906

Note Action
CAUTION
The lower and upper arms together weigh
30 kg.
All lifting accessories used must be sized
accordingly!
3
xx1300002554
If there is enough space on the site, lay
down the lower arm on a workbench. Make
sure to support the gravity center of the
lower arm.
If the site is cramp, the procedure can be
performed having the lower arm hanging
in the lifting slings.
If removing the axis-2 drive unit from a
hanging lower arm, it is best performed by
two persons working together:
• Person 1: Hold the lower arm still.
• Person 2: Remove the drive unit
screws according to step below.
4
Remove the grey screws from the drive
unit.
WARNING
Keep the eight black screws fitted. They
hold the gearbox together. Removing them
can damage the gearbox severely.
5
xx1400000008
Insert two M4 screws to the press out holes
and press out the drive unit. 6
xx1300002555
Carefully pull out the complete drive unit. 7
Continues on next page
652 Product manual - IRB 1200
3HAC046983-001 Revision: S
© Copyright 2014 - 2021 ABB. All rights reserved.
4 Repair
4.6.2 Replacing the axis-2 drive unit
Continued