ABB IRB 1200 Product Manual Download Page 309

Page: 309 / 906

Note

Article number

Spare part

Used with protection type Clean
Room.
Used for robots with food grade
lubrication.
Used with protection type Hy-
gienic.
Includes guide pin.

3HAC059704-001

Lower arm, Clean Room (IRB
1200-7/0.7 )
Lower arm, food grade lubrica-
tion (IRB 1200-7/0.7 )
Lower arm, Hygienic (IRB 1200-
7/0.7 )

Includes guide pin.

3HAC059688-001

Lower arm (IRB 1200-5/0.9 )

Used with protection type Clean
Room.
Used for robots with food grade
lubrication.
Used with protection type Hy-
gienic.
Includes guide pin.

3HAC059705-001

Lower arm, Clean Room (IRB
1200-5/0.9 )
Lower arm, food grade lubrica-
tion (IRB 1200-5/0.9 )
Lower arm, Hygienic (IRB 1200-
5/0.9 )

Used with protection class IP67.
Used with protection type
Foundry Plus.
Replace if damaged.

3HAC044641-005

M2 variseal sealing

Replace if damaged.

3HAC059690-001

Cable housing of the lower arm

Used with protection type Clean
Room.
Used for robots with food grade
lubrication.
Used with protection type Hy-
gienic.
Replace if damaged.

3HAC056135-001

Cable housing of the lower arm,
Clean Room
Cable housing of the lower arm,
food grade lubrication
Cable housing of the lower arm,
Hygienic

Not used with protection class
IP40.
Replace if damaged.

3HAC044895-001 /
3HAC080696-001

Gasket on lower arm cable
housing

Used with protection class IP67.
Used with protection type
Foundry Plus.
Replace if damaged.

3HAC044641-006

M2 variseal sealing

Not used with protection class
IP40.
Replace if damaged.

3HAC024865-001

Radial sealing

Replace if damaged.

3HAC044677-001

Axis-2 sealing ring

Not used with protection class
IP40.
Replace if damaged.

3HAC045688-001 /
3HAC080697-001

Gasket of axis-2 sealing ring

Not used with protection class
IP40.
Replace if damaged.

3HAC044894-001 /
3HAC080695-001

Gasket of plastic plate

Replace if damaged.

3HAC059689-001

Lower arm cover

Continues on next page

Product manual - IRB 1200

309

3HAC046983-001 Revision: S

4 Repair

4.4.1 Replacing the lower arm

Continued

Summary of Contents for IRB 1200










































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for IRB 1200

Reviews:

ABB IRB 1200, Product Manual, Page: 309 / 906

Search results

Summary of Contents for IRB 1200

Reviews: