Thermo Scientific 5030i SHARP, Инструкция по эксплуатации

Страница: 39 / 403

Thermo Fisher Scientific Model 5030 i SHARP Instruction Manual 2-1
Chapter 2
Installation
The following installation procedures for the Model 5030 i describes
packaging, lifting the instrument, unpacking the instrument, setup and
installation, including the sample tube and pump, and attaching the analog
and/or digital outputs to a recording device. The installation should always
be followed by instrument calibration as described in the “
Calibration ”
chapter of this manual.
This chapter provides the following recommendations and procedures for
installing the instrument:
●
“ Packaging and Transport ” on page 2-1
●
“ Lifting ” on page 2-2
●
“ Unpacking and Inspection ” on page 2-2
●
“ Acceptance Testing and Startup Procedures ” on page 2-3
●
“ Setup ” on page 2-10
●
“ Connecting External Devices ” on page 2-17
●
“ Startup ” on page 2-22
●
“ Data Content ” on page 2-23
●
“ Shutdown ” on page 2-23
●
“ Important Tips ” on page 2-23
The Model 5030 i instrument, power cord, and operator manual are
shipped in an ISTA 2A-certified packaging and all other items/accessories
are shipped separately. The ISTA 2A-certified packaging is comprised of
the instrument within an inner box which is secured within an outer box
using foam end-caps and corner bracing. In this configuration, the
packaging is ready for shipping by carrier domestically and internationally.
Packaging and
Transport