Thermo Scientific 5030i SHARP, Инструкция по эксплуатации

Страница: 40 / 403

Installation
Lifting
2-2 Model 5030 i SHARP Instruction Manual Thermo Fisher Scientific
The inner box that the instrument resides in is an ISTA 1A-certified
packaging and is appropriate for transporting the instrument on local paved
roads to the monitoring site. Precautions should be taken to secure this
package from shifting during local transport.
Using the ISTA-2A packaging is strongly recommended for transporting
the instrument over poor roads or on highways.
When lifting the instrument, use a procedure appropriate to lifting a heavy
object, such as bending at the knees while keeping your back straight and
upright. Grasp the instrument at the bottom in the front and at the rear of
the unit. Although one person may lift the unit, it is desirable to have two
persons lifting, one by grasping the bottom in the front and the other by
grasping the bottom in the rear.
Equipment Damage Do not attempt to lift the instrument by the cover or
other external fittings. ▲
If there is obvious damage to the shipping container when the instrument is
received, notify the carrier immediately and hold for inspection. The carrier
is responsible for any damage incurred during shipment.
Use the following procedure to unpack and inspect the instrument.
1. Remove the instrument from its shipping container(s) and set it on a
table or bench that allows easy access to both the front and rear.
2. Remove the cover to expose the internal components.
3. Remove the packing material in the analyzer ( Figure 2–1 ).
Lifting
Unpacking and
Inspection