Thermo Scientific 5030i SHARP, Инструкция по эксплуатации

Страница: 8 / 403

About This Manual
Electrical/Safety Certifications
iv Model 5030 i SHARP Instruction Manual Thermo Fisher Scientific
Alert Description
use a soft cloth moistened with a naphtha cleaning
solvent.
▲
Do not place the LCD module near organic solvents or
corrosive gases.
▲
Do not shake or jolt the LCD module.
▲
The product has been tested and has been documented to be in compliance
with the following U.S. and Canadian safety standards:
UL Standard 61010-1:2004 2nd Edition
CAN/CSA C22.2 No. 1010-1:2004 2nd Edition
IEC 61326-2-3: 2006
Thermo Fisher Scientific certifies that this product operates in compliance
with the EC Directive 89/336/EEC in reference to electrical emissions and
immunity. Specifically, the equipment meets the requirements of EN
61326-1:1998 for Immunity and Emissions. In addition, the hardware has
been tested for personal or fire safety hazards in accordance with EN61010-
1:2001 (Safety) in fulfillment of EC Directive 73/23/EEC.
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note This equipment has been tested and found to comply within the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference, in
which case the user will be required to correct the interference at his or her
own expense.
▲
Electrical/Safety
Certifications
FCC Compliance