Thermo Scientific 5030i SHARP, Инструкция по эксплуатации

Страница: 331 / 403

C-Link Protocol Commands
Diagnostics
Thermo Fisher Scientific Model 5030 i SHARP Instruction Manual B-23
alarm tape counter max
This command reports the current filter tape count alarm maximum value
setting. The following example reports that the filter tape count alarm
maximum value is 480.
Send: alarm tape counter max
Receive: alarm tape counter max 480
set alarm tape counter max value
This command sets the filter tape count alarm maximum value , where value
is an integer number representing filter tape alarm limits. The following
example sets the filter tape count alarm maximum value to 490.
Send: set alarm tape counter max 490
Receive: set alarm tape counter max 490 ok
alarm vac pres min
alarm vac pres max
These commands report the current vacuum pressure alarm minimum and
maximum value settings. The following example reports that the vacuum
pressure alarm minimum value is -20.0 mmHg.
Send: alarm vac pres min
Receive: alarm vac pres min -20.0 mmHg
set alarm vac pres min value
set alarm vac pres max value
These commands set the vacuum pressure alarm minimum and maximum
values to
value , where value is a floating-point number representing
vacuum pressure alarm limits in millimeters of mercury. The following
example sets the vacuum pressure alarm maximum value to 250.0 mmHg.
Send: set alarm vac pres max 250
Receive: set alarm vac pres max 250 ok
amb rh
This command reports the ambient RH, in percent. The following example
reports that the ambient RH is 30%.
Send: amb rh
Receive: amb rh 30.0 %
amb temp
This command reports the current ambient temperature, in degrees C. The
following example reports that the ambient temperature is 15 °C.
Send: amb temp
Receive: amb temp 15.0 degC
Diagnostics