Thermo Scientific 5030i SHARP, Инструкция по эксплуатации

Страница: 123 / 403

Operation
Diagnostics Menu
Thermo Fisher Scientific Model 5030 i SHARP Instruction Manual 3-61
NEPH BOARD VOLTAGES:
3.3 SUPPLY 3.3 V
3.3 SUPPLY 3.3 V
5.0 SUPPLY 5.0 V
7.5 SUPPLY 7.5 V
-5.0 SUPPLY -5.0 V
RANGE AVG DIAGS ALARM
-7.5 SUPPLY -7.5 V
The RH/Temperature screen (read only) displays the current relative
humidity and temperature readings. The board temperature is the air
temperature measured by a sensor located on the measurement interface
board.
●
In the Main Menu, choose Diagnostics > RH/Temperature .
RH/TEMPERATURES:
>AMBIENT RH 40.0 %
SAMPLE RH 36.4 %
AMBIENT TEMP 22.9 o C
FLOW TEMP 23.9 o C
BOARD TEMP 24.9 o C

RANGE AVG DIAGS ALARM
The Pressure/Vacuum screen (read only) displays the current pressure
readings. The pressure is measured by a pressure transducer. The vacuum is
the amount of vacuum under the filter tape. The flow pressure is the
pressure differential across the orifice.
●
In the Main Menu, choose Diagnostics > Pressure/Vacuum .
PRESSURE/VACUUM:
BAROMETRIC 760.1 mmHg
VACUUM 60.5 mmHg
FLOW 21.5 mmHg
RANGE AVG DIAGS ALARM
The Flow screen (read only) displays the current sample flow reading. The
flow is measured by the internal pressure board sensors.
●
In the Main Menu, choose Diagnostics > Flow .
RH/Temperature
Pressure/Vacuum
Flow