Thermo Scientific 5030i SHARP, Инструкция по эксплуатации

Страница: 220 / 403

Servicing
Service Locations
7-2 Model 5030 i SHARP Instruction Manual Thermo Fisher Scientific
●
“ Pressure Board Calibration ” on page 7-20
●
“ Analog Output Testing ” on page 7-21
●
“ Analog Output Calibration ” on page 7-24
●
“ Analog Input Calibration ” on page 7-25
●
“ Themistor Replacement ” on page 7-26
●
“ I/O Expansion Board (Optional) Replacement ” on page 7-27
●
“ Digital Output Board Replacement ” on page 7-29
●
“ Motherboard Replacement ” on page 7-30
●
“ Measurement Interface Board Replacement ” on page 7-31
●
“ Photo Interrupt Board Replacement ” on page 7-32
●
“ Proportional Valve Replacement ” on page 7-33
●
“ Detector Assembly Replacement ” on page 7-34
●
“ Flow RTD Replacement ” on page 7-36
●
“ Transformer Replacement ” on page 7-37
●
“ Radius Tube Replacement ” on page 7-38
●
“ Ambient RH/Temperature Replacement ” on page 7-39
●
“ Front Panel Board Replacement ” on page 7-41
●
“ LCD Module Replacement ” on page 7-42
●
“ Removing the SHARP Optics Cover ” on page 7-44
●
“ External Solenoid Valve Replacement ” on page 7-45
●
“ SHARP RH/Temp Sensor Replacement ” on page 7-46
●
“ SHARP Interface Board Replacement ” on page 7-47
●
“ Delrin Nut Replacement ” on page 7-49
●
“ Internal SHARP Cable Assembly Replacement ” on page 7-51
●
“ Case Cable Replacement ” on page 7-52
●
“ External Zeroing Filter ” on page 7-53
●
“ Service Locations ” on page 7-54