Thermo Scientific 5030i SHARP, Инструкция по эксплуатации

Страница: 330 / 403

C-Link Protocol Commands
Alarms
B-22 Model 5030 i SHARP Instruction Manual Thermo Fisher Scientific
alarm neph temp min
alarm neph temp max
This command reports the current nephelometer temperature alarm
maximum value setting. The following example reports that the
nephelometer temperature alarm maximum value is 5.0 °C.
Send: alarm neph temp max
Receive: alarm neph temp max 5.0 degC
set alarm neph temp min value
set alarm neph temp max value
This command sets the nephelometer temperature alarm maximum value
to
value , where value is a floating-point number representing nephelometer
temperature alarm limits in °C. The following example sets the
nephelometer temperature alarm maximum value to 40.0 °C.
Send: set alarm neph temp max 40
Receive: set alarm neph temp max 40 ok
alarm sample rh min
alarm sample rh max
These commands report the current sample relative humidity alarm
minimum and maximum value settings. The following example reports
that the sample relative humidity alarm minimum value is 5%.
Send: alarm sample rh min
Receive: alarm sample rh min 5.0 %
set alarm sample rh min value
set alarm sample rh max value
These commands set the sample relative humidity alarm minimum and
maximum values to
value , where value is a floating-point number
representing sample relative humidity alarm limits in percent. The
following example sets the sample relative humidity alarm maximum value
to 40%.
Send: set alarm sample rh min 40
Receive: set alarm sample rh min 40 ok
alarm status det
This command reports the board status of the detector as FAIL or OK. The
following example reports that the detector board status is OK.
Send: alarm status det
Receive: alarm status det ok