Thermo Scientific 5030i SHARP, Инструкция по эксплуатации

Страница: 111 / 403

Operation
Volumetric Conditions
Thermo Fisher Scientific Model 5030 i SHARP Instruction Manual 3-49
ALLOW OVER/UNDER RANGE:
CURRENTLY: ON
SET TO: OFF ?

TOGGLE VALUE
RANGE AVG DIAGS ALARM
The Analog Output Configuration menu displays a list of the analog
output configuration choices, from which the user selects the parameter to
adjust for the selected output channel. Configuration choices include
selecting range, setting minimum/maximum values, and choosing the
signal to output.
●
In the Main Menu, choose Instrument Controls > I/O Configuration
> Analog Output Config >
All Voltage Channels, All Current
Channels, Voltage Channel 1–6 or Current Channel 1–6 .
ANALOG OUTPUT CONFIG:
>SELECT RANGE
SET MINIMUM VALUE
SET MAXIMUM VALUE
CHOOSE SIGNAL TO OUTPUT
RANGE AVG DIAGS ALARM
The Select Range screen is used to select the hardware range for the selected
analog output channel. Possible ranges for the voltage outputs are: 0-100
mV, 0-1, 0-5, and 0-10 V. Possible ranges for the current outputs are: 0-20
mA and 4-20 mA.
●
In the Main Menu, choose Instrument Controls > I/O Configuration
> Analog Output Config > select Channel >
Select Range .
SELECT OUTPUT RANGE:
SELECTED OUTPUT: V ALL
CURRENTLY: 0-10V
SET TO: 0-100mV ?
 CHANGE VALUE  SAVE
RANGE AVG DIAGS ALARM
The Minimum and Maximum Value screens are used to edit the zero (0)
and full-scale (100) values, respectively, in percentages for the selected
Analog Output Configuration
(Select Action)
Select Range
Minimum and Maximum
Value