Installing and retracting the variable knife edge
MiniFlex 600: Benchtop X-ray Diffractometer
25
2
Lift up the slider of variable knife edge and install the variable knife
edge on the sample holder.
Install it so the roller is placed on top of the cam base.
Fig. 5.19 Installing the variable knife edge
3
Align the marker on the sample holder with the marker on the variable
knife edge as shown in Fig. 5.20.
Fig. 5.20 Aligning the markers
4
Tighten the fixing screw with hex wrench and fix the variable knife
edge in place.
Fig. 5.21 Fixing the variable knife edge in place
Sample
stage
Slider
Cam base
Roller
Marker on
knife edge
Marker on
sample holder
Fixing
screw