Panasonic MINAS A6N Series, Руководство по эксплуатации

Страница: 45 / 495

2-15 Rev.2.00
1
Before Using the Products
2
Preparation
3
Setup
4
Trial Run
5
Adjustment
6
When in T
rouble
7
Supplement
Noise Filter
Option part No.
Voltage specifications
for driver
Manufacturer’s
part No.
Applicable
driver
(frame)
Manufacturer
DV0P4170 Single phase 100 V/200 V SUP-EK5-ER-6 A, B-frame
Okaya Electric Ind.
DV0PM20042
3-phase 200 V
3SUP-HU10-ER-6
A, B-frame
Single phase 100 V/200 V
3-phase 200 V
C-frame
DV0P4220 Single/ 3-phase 200 V 3SUP-HU30-ER-6 D-frame
DV0PM20043 3-phase 200 V 3SUP-HU50-ER-6 E-frame
DV0P3410 3-phase 200 V 3SUP-HL50-ER-6B F-frame
• Select a noise filter whose capacity is commensurate with the power source capacity (in
consideration of the load condition).
• For the detailed specifications of each noise filter, contact the manufacturer.
• When two or more servo drivers are used with a single noise filter at the common pow
-
er source, consult with the noise filter manufacturer.
• Do not run the input and output wiring on the same passage: noise resistance will drop. (Figure
at lower right)
• Isolate the input and output line from each other. (Figure at lower left)
1
Isolate the input and output
2
3
4
5
6
E
Noise Filter
AC input AC output
Ground
1
The effect of the noise filter is a little.
Do not place the input and output lines
in the same duct or do not tie both in a bundle.
2
3
4
5
6
E
Noise Filter
AC input
AC output
Ground
Surge Absorber
Option part No.
Voltage specifications
for driver
Manufacturer’s
part No.
Manufacturer
DV0P1450 3-phase 200 V R
･
A
･
V-781BXZ-4
Okaya Electric Ind.
DV0P4190 Single phase 100 V/200 V R
･
A
･
V-781BWZ-4
When performing withstand voltage test of machine and equipment, be sure to remove the
surge absorber; otherwise, it will be damaged.
• P.2-18 “ List of Applicable Peripheral Equipments of Driver ” • P.7-69 “Options”
2. Conformance to International Standards
Peripheral Equipments
Remarks
Related page