![background image](http://html1.mh-extra.com/html/omron/yrcx-series/yrcx-series_operation-manual_744000245.webp)
A
Troubleshooting
A-59
17.905 : Resolver wire breakage
Code
: &H0011 &H0389
Meaning/Cause
a. The resolver signal wire is broken.
b. The motor malfunction occurred.
c. The controller malfunction occurred.
Action
a. Replace the ROB I/O cable.
b. Replace the motor.
c. Replace the controller.
17.906 : ABS. mixing error 2
Code
: &H0011 &H038A
Meaning/Cause
The position data count is not consistent while the controller power is on.
Action
• Replace the ROB/IO cable.
• Replace the controller.
17.910 : Position deviation error
Code
: &H0011 &H038E
Meaning/Cause
a. The robot drive section mechanically locked.
b. The motor acceleration is excessive.
c. The system generation setting is incorrect.
d. The motor cable wiring is broken or wiring is incorrect.
e. The vertical axes electromagnetic brake is defective.
f. Wiring is incorrect or disconnected on the vertical axes electromagnetic brake.
g. The SAFETY connector is not used correctly.
Action
a. Perform robot service and maintenance.
b. Lower the motor acceleration.
c. Redo the system generation.
d-1. Wire the motor cable correctly.
d-2. Replace the motor cable.
e. Replace the vertical axes electromagnetic brake.
f. Replace the ROB I/O cable.
g. Do not use 24 V DC from the SAFETY connector as power source for external loads.
17.911 : Velocity deviation error
Code
: &H0011 &H038F
Meaning/Cause
a. The robot drive section mechanically locked.
b. The motor acceleration is excessive.
c. The system generation setting is incorrect.
d. The motor cable wiring is broken or wiring is incorrect.
e. The vertical axes electromagnetic brake is defective.
f. Wiring is incorrect or disconnected on the vertical axes electromagnetic brake.
Action
a. Perform robot service and maintenance.
b. Lower the motor acceleration.
c. Redo the system generation.
d-1. Wire the motor cable correctly.
d-2. Replace the motor cable.
e. Replace the vertical axes electromagnetic brake.
f. Replace the ROB I/O cable.
17.912 : Current deviation error
Code
: &H0011 &H0390
Meaning/Cause
a. The motor cable wiring was broken.
b. The controller was defective.
Action
a. Replace the motor cable.
b. Replace the controller.
Содержание YRCX Series
