Omron YRCX Series, Руководство по эксплуатации

Страница: 197 / 266

A
Troubleshooting
A-11
1.5 : Program ended by "HALT"
Code : &H0001 &H0005
Meaning/Cause The program execution was terminated by the "HALT" command.
Action −−−
1.6 : Program stopped by "HOLDALL"
Code : &H0001 &H0006
Meaning/Cause The program execution was stopped by the "HOLDALL" command.
Action
The stop status is canceled by pressing the RUN key and the program execution restarts from
the next command.
1.7 : Program stopped by "HOLD"
Code : &H0001 &H0007
Meaning/Cause The program execution was stopped by the "HOLD" command.
Action
The stop status is canceled by pressing the RUN key and the program execution restarts from
the next command.
1.8 : Stop executed
Code : &H0001 &H0008
Meaning/Cause The program/command execution was stopped by external stop command.
Action −−−
1.9 : Arrived at debug
Code : &H0001 &H0009
Meaning/Cause
• The program in execution reached the break point and stopped.
• The program executed by the "RUNTO" command reached the specified line and stopped.
• One line of the program was executed and stopped by the "STEP/NEXT" command.
Action −−−
1.10 : Changed control right
Code : &H0001 &H000A
Meaning/Cause The operation stopped since the control setting was changed.
Action Change the control setting to "RELEASE" with the programming box.
1.12 : Program stopped by key release
Code : &H0001 &H000C
Meaning/Cause The RUN key was released in the "Hold To Run" enable status.
Action −−−
1.13 : Changed PRINT/INPUT right
Code : &H0001 &H000D
Meaning/Cause The operation stopped since the "PRINT/INPUT using channel" was changed.
Action Change the setting of "PRINT/INPUT channel in use" of the controller parameter.