![background image](http://html1.mh-extra.com/html/omron/yrcx-series/yrcx-series_operation-manual_744000059.webp)
3
Opera
tion
3-11
■
Each axis point trace
Step 1
Display the "PTP (SEP)" screen.
Press the F8 key (SEP) on the "PTP (ALL)" screen (Operation Point Trace).
"PTP (SEP)" screen
Step 2,3
Step 2
Select the point number to check.
Use the cursor keys to select [ ] or [ ] on
the screen and press the ENTER key to
change the point number.
Or, select [P00000] to input the point number
directly, and then press the ENTER key.
The point number can also be selected with
the F7 key (JUMP).
For details, refer to "3.6 Jumping the point
display" in this Chapter.
Step 3
Select the axis number to check.
Use the cursor keys to select [ ] or [ ] on
the screen and press the ENTER key to
change the axis number.
Select [Axis1] to input the axis number
directly, and then press the ENTER key
otherwise.
NOTE
When a SCARA type robot is used and a hand system flag is set for the point data, the hand system will have
priority over the current arm type.
Step 4
Execute point trace.
Press the RUN key and the robot moves by PTP motion to the position of the selected point. The trace
speed is 1/10 of the AUTO movement speed.
To stop point trace, press the STOP key
* For details about how to set the speed, refer to "3.4 Setting the speed" in this Chapter.
3.2 Linear interpolation motion
Valid keys and submenu descriptions on the "LINEAR (ALL)" and "LINEAR (SEP)" screen are shown below.
Valid keys
Menu
Function
/
/
/
Moves the cursor.
Executes the point trace.
Stops the point trace.
SPEED
Sets the movement speed for the point trace.
PTP
Changes the trace type to PTP motion.
ARCH
Changes the trace type to the arch motion.
UNIT
Changes the display units of the current position to [pulse], [mm], and [mm](tool) in this order.
JOG
Moves to the "JOG“ screen.
EDIT
Moves to the "POINT EDIT" screen.
JUMP
Displays the point data of the specified point number.
SEP / ALL
Changes the point trace target axis to individual axis or all axes.
Returns to the previous screen.
WARNING
The robot moves when point trace starts. To avoid danger, do not enter the robot movement range.
Содержание YRCX Series
