manualshive.com logo in svg

GE UR Series C70, Инструкция по эксплуатации

GE UR Series C70 - инструкция по использованию доступна для загрузки совершенно бесплатно на manualshive.com. Вы можете с легкостью скачать все необходимые руководства по эксплуатации для вашего устройства. Подробное описание функций и возможностей продукта поможет вам эффективно использовать его в повседневной жизни.

Поделиться
Скачать
background image

4-2

C70 Capacitor Bank Protection and Control System

GE Multilin

4.1 ENERVISTA UR SETUP INTERFACE

4 HUMAN INTERFACES

4

RS485 COM2 Baud Rate

RS485 COM2 Parity

COM2 Minimum Response Time

COM2 Selection

RRTD Slave Address

RRTD Baud Rate

IP Address

IP Subnet Mask

Gateway IP Address

Ethernet Sub Module Serial Number

Network Address NSAP

IEC61850 Config GOOSE ConfRev

c) CREATING AND EDITING FLEXLOGIC™

You can create or edit a FlexLogic™ equation in order to customize the relay. You can subsequently view the automatically
generated logic diagram.

d) VIEWING ACTUAL VALUES

You can view real-time relay data such as input/output status and measured parameters.

e) VIEWING TRIGGERED EVENTS

While the interface is in either on-line or off-line mode, you can view and analyze data generated by triggered specified
parameters, via one of the following:

•

Event Recorder facility: 

The event recorder captures contextual data associated with the last 1024 events, listed in

chronological order from most recent to oldest.

•

Oscillography facility: 

The oscillography waveform traces and digital states are used to provide a visual display of

power system and relay operation data captured during specific triggered events.

f) FILE SUPPORT

•

Execution: 

Any EnerVista UR Setup file which is double clicked or opened will launch the application, or provide focus

to the already opened application. If the file was a settings file (has a 

URS

 extension) which had been removed from

the Settings List tree menu, it will be added back to the Settings List tree menu.

•

Drag and Drop: 

The Site List and Settings List control bar windows are each mutually a drag source and a drop target

for device-order-code-compatible files or individual menu items. Also, the Settings List control bar window and any
Windows Explorer directory folder are each mutually a file drag source and drop target.

New files which are dropped into the Settings List window are added to the tree which is automatically sorted alphabet-
ically with respect to settings file names. Files or individual menu items which are dropped in the selected device menu
in the Site List window will automatically be sent to the on-line communicating device.

g) FIRMWARE UPGRADES

The firmware of a C70 device can be upgraded, locally or remotely, via the EnerVista UR Setup software. The correspond-
ing instructions are provided by the EnerVista UR Setup Help file under the topic “Upgrading Firmware”.

Modbus addresses assigned to firmware modules, features, settings, and corresponding data items (i.e. default
values, minimum/maximum values, data type, and item size) may change slightly from version to version of firm-
ware. The addresses are rearranged when new features are added or existing features are enhanced or modified.
The 

EEPROM DATA ERROR

 message displayed after upgrading/downgrading the firmware is a resettable, self-test

message intended to inform users that the Modbus addresses have changed with the upgraded firmware. This
message does not signal any problems when appearing after firmware upgrades.

NOTE

Содержание UR Series C70







































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для UR Series C70

Eaton ARCON 3G Instructions Manual preview
ARCON 3G
Бренд: Eaton Страницы: 104
Toshiba 50HMX96 - 50" Rear Projection TV (French) Manual D'Installation preview
50HMX96 - 50" Rear Projection TV
Бренд: Toshiba Страницы: 24
Toshiba 50HMX96 - 50" Rear Projection TV Operating Manual preview
50HMX96 - 50" Rear Projection TV
Бренд: Toshiba Страницы: 90
Philips Magnavox 8P4844C Specification Sheet preview
Magnavox 8P4844C
Бренд: Philips Страницы: 2
Philips Magnavox 8P5431C Specification Sheet preview
Magnavox 8P5431C
Бренд: Philips Страницы: 2
Philips Magnavox 8P4831C Specification Sheet preview
Magnavox 8P4831C
Бренд: Philips Страницы: 2
Philips Magnavox 7P6030W Specification Sheet preview
Magnavox 7P6030W
Бренд: Philips Страницы: 2
Philips Magnavox 7P5441C Specifications preview
Magnavox 7P5441C
Бренд: Philips Страницы: 2
Philips Magnavox 7P4830W Specification Sheet preview
Magnavox 7P4830W
Бренд: Philips Страницы: 2
Philips Magnavox 8P5431C101 Instructions For Use Manual preview
Magnavox 8P5431C101
Бренд: Philips Страницы: 46
Philips Magnavox 7P4830W199 Owner'S Manual preview
Magnavox 7P4830W199
Бренд: Philips Страницы: 46
Philips Magnavox 8P4841C199 Instructions For Use Manual preview
Magnavox 8P4841C199
Бренд: Philips Страницы: 54
Philips Magnavox 7P5441C Owner'S Manual preview
Magnavox 7P5441C
Бренд: Philips Страницы: 56
Philips MAGNAVOX 7P6041C101 Owner'S Manual preview
MAGNAVOX 7P6041C101
Бренд: Philips Страницы: 56
Philips Magnavox 7P4841 Owner'S Manual preview
Magnavox 7P4841
Бренд: Philips Страницы: 56
RCA F27689 User Manual preview
F27689
Бренд: RCA Страницы: 64
DAEWOO ELECTRONICS DSJ-4710CRU Service Manual preview
DSJ-4710CRU
Бренд: DAEWOO ELECTRONICS Страницы: 69
SafeWaze Tool Lanyard User Instruction Manual preview
Tool Lanyard
Бренд: SafeWaze Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды