Dell C7765DN, Руководство пользователя

Страница: 463 / 829

Installation of Dell Printer Configuration Web Tool
463
Configuration on the Machine
The following describes the configuration procedure for using Dell Printer Configuration
Web Tool on the machine.
1
Display the [Tools] screen.
1) Press the <Log In/Out> button.
2) Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
then select [Enter].
Note • The default user ID is "admin".
•
The default passcode is "1111".
3) Select [Tools] on the [Home] screen.
4) Select [System Settings].
2
Enable the Internet Services (HTTP) port on the machine.
1) Select [Connectivity & Network Setup].
2) Select [Port Settings].
3) Select [Internet Services (HTTP)], and then select [Change Settings].
4) Select [Port Status], and then select [Change Settings].
5) Select [Enabled], and then select [Save].
6) Select [Close] repeatedly until the [Tools] screen is displayed.
3
Set an IP address.
If an IP address is already set, you can skip this step. For an environment with DHCP or
BOOTP, configure the method for obtaining the address. If an IP address cannot be
obtained automatically or manual configuration is preferred, confirm the settings of an IP
address, a subnet mask, and a gateway address.
For information on how to set an IP address, refer to "Protocol Settings" (P.363).
4
Select [Close] repeatedly until the [Tools] screen appears.
5
Select [Close].
Note • Rebooting the machine may be required depending on the settings. When a message displayed on the
screen, follow the message and reboot the machine.
6
After the machine reboots, you can print out a configuration report to confirm that the port
for Dell Printer Configuration Web Tool is enabled and TCP/IP is set up correctly.
For information on how to print a configuration report, refer to "Print Reports" (P.276).
7
Start Dell Printer Configuration Web Tool to confirm whether the service is available or
not.
For information on how to start Dell Printer Configuration Web Tool, refer to "Starting Dell Printer
Configuration Web Tool" (P.464).