AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 931 / 1248

Version 7.2 931 Mediant 500 MSBR
User's Manual 63. Syslog and Debug Recording
x]
Filter Type
filter-type
[LoggingFilters_Filter
Type]
Defines the filter type criteria.

[1] Any (default)

[2] Trunk ID = Filters log by Trunk ID. Note: Applicable only to the
Gateway application.

[3] Trunk Group ID = Filters log by Trunk Group ID. To configure Trunk
Groups, see Configuring Trunk Groups on page 485. Note: Applicable
only to the Gateway application.

[4] Trunk & B-channel = Filters log by Trunk and B-channel. Note:
Applicable only to the Gateway application.

[5] FXS or FXO = Filters log by FXS and/or FXO port.

[6] Tel-to-IP = Filters log by Tel-to-IP routing rule. To configure Tel-to-IP
routing rules, see Configuring Tel-to-IP Routing Rules on page 495.
Note: Applicable only to the Gateway application.

[7] IP-to-Tel = Filters log by IP-to-Tel routing rule. To configure IP-to-Tel
routing rules, see Configuring IP-to-Tel Routing Rules on page 504.
Note: Applicable only to the Gateway application.

[8] IP Group = Filters log by IP Group. To configure IP Groups, see
Configuring IP Groups on page 333.

[9] SRD = Filters log by SRD. To configure SRDs, see Configuring
SRDs on page 315.

[10] Classification = Filters log by Classification rule. To configure
Classification rules, see Configuring Classification Rules on page 663.
Note: Applicable only to the SBC application.

[11] IP-to-IP Routing = Filters log by IP-to-IP routing rule. To configure
IP-to-IP routing rules, see Configuring SBC IP-to-IP Routing Rules on
page 671. Note: Applicable only to the SBC application.

[12] User = Filters log by user. The user is defined by username or
username@hostname in the Request-URI of the SIP Request-Line. For
example, "2222@10.33.45.201", which represents the following INVITE:
INVITE sip: 2222@10.33.45.201 ;user=phone SIP/2.0

[13] IP Trace = Filters log by an IP network trace, Wireshark-like
expression. For more information, see Filtering IP Network Traces on
page 933.

[14] SIP Interface = Filters log by SIP Interface. To configure SIP
Interfaces, see Configuring SIP Interfaces on page 325.
Value
value
[LoggingFilters_Valu
e]
Defines the value for the filtering type configured in the 'Filter Type'
parameter.
The value can include the following:

A single value.

A range, using a hyphen "-" between the two values. For example, to
specify IP Groups 1, 2 and 3, configure the parameter to "1-3" (without
apostrophes).

Multiple, non-contiguous values, using commas "," between each value.
For example, to specify IP Groups 1, 3 and 9, configure the parameter
to "1,3,9" (without apostrophes).

Trunks/FXO/FXS pertaining to a module, using the syntax module
number/port or port, for example:

"1/2" (without apostrophes), means module 1, port 2

"1/[2-4]" (without apostrophes), means module 1, ports 2 through 4

The exclamation ( ! ) wildcard character can be used for excluding a