AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 935 / 1248

Version 7.2 935 Mediant 500 MSBR
User's Manual 63. Syslog and Debug Recording
10:21:28.037 : 10.15.7.95 : NOTICE : [S=872] [ BID =3aad56:32]
Activity Log: WEB: Successful login at 10.15.7.95:80. User:
Admin. Session: HTTP (10.13.22.54)
The format of the Syslog message is described in the following table below:
Table 63-3: Syslog Message Format Description
Message Item Description
Message Types Syslog generates the following types of messages:

ERROR: Indicates that a problem has been identified that
requires immediate handling.

WARNING: Indicates an error that might occur if measures
are not taken to prevent it.

NOTICE: Indicates that an unusual event has occurred.

INFO: Indicates an operational message.

DEBUG: Messages used for debugging.
Note:

The INFO and DEBUG messages are required only for
advanced debugging and by default, they are not sent by
the device.

When viewing Syslog messages in the Web interface,
these message types are color coded.
Message Sequence Number
[S=<number>]
By default, Syslog messages are sequentially numbered in the
format [S=<number>], for example, "[S=643]". A skip in the
number sequence of messages indicates a loss of message
packets. For example, in the below Syslog, messages 238
through 300 were not received. In other words, 63 Syslog
messages were lost (the sequential numbers are indicated
below in bold font):
18:38:14. 52 : 10.33.45.72 : NOTICE:
[
S=235 ][SID:2ed1c8:96:5] (lgr_psbrdex)(619)
recv <-- DIGIT(0) Ch:0 OnTime:0
InterTime:100 Direction:0 System:1 [File:
Line:-1]
18:38:14. 83 : 10.33.45.72 : NOTICE:
[
S=236 ][SID:2ed1c8:96:5] (lgr_flow)(620)
#0:DIGIT_EV [File: Line:-1]
18:38:14. 83 : 10.33.45.72 : NOTICE:
[
S=237 ][SID:2ed1c8:96:5] (lgr_flow)(621) |
#0:DIGIT_EV [File: Line:-1]
18:38:14.958 : 10.33.45.72 : NOTICE:
[
S=301 ][SID:2ed1c8:96:5] (lgr_flow)(625) |
#0:DIGIT_EV [File: Line:-1]
You can disable the inclusion of the message sequence
number in Syslog messages, by setting the 'CDR Syslog
Sequence Number' parameter to
Disable (see Configuring
Syslog on page 940).
Log Number
(lgr)(number)
Ignore this number; it has been replaced by the Message
Sequence Number (described previously).