AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 845 / 1248

Version 7.2 845 Mediant 500 MSBR
User's Manual 54. System Status
MWI Information Indicates if the phone has a voice-mail message
(Message Waiting Indicator):

"yes": Endpoint has a voice-mail message.

"...": No voice mail for the endpoint.
Note: The field is applicable only to FXS
interfaces.
Call ID Call ID number of the call (SIP Call-ID header).
Call Originator Caller:

"TEL": Call made from Tel side (i.e., the port)

"IP": Call made from IP side
Source Tel Number Telephone number of the caller.
Destination Tel Number Telephone number of the called party.
Redirect Calling Number Telephone number of the redirected number.
Remote Signaling IP IP address used for SIP on the IP side.
Remote RTP (IP:Port) IP address and port used for RTP on the IP side.
Call Establishment Duration Length of time (in seconds) it took to establish the
call.
Call Duration Call duration (in seconds) from when call was
established.
Call State Current state of the call:

"IDLE": No call.

"SETUP": Signaling to setup call (SIP
INVITE).

"ALERT": Ringing at remote end (SIP 180
Ringing).

"RINGBACK": Ringback played to port.

"SESSION": Call has been answered and is
established.

"RELEASE": Call has been terminated (SIP
200 OK).
Fax State Currently, not in use.
Coder + PTime Coder and packetization time used for the call.
Call Type Type of call:

"Voice": Voice call

"Fax": Fax call
Call Establishment Method Mode of call:

"Normal": No early media during SIP session
establishment (before call accepted).

"EarlyMedia": Media sent (e.g.,
announcements) before call accepted by
called party.
DTMF Selected Method for Tx/Rx DTMF Transport method used for the call. For
configuring the transport method, see Configuring
DTMF Transport Types on page 181.
Basic Channel Identifier: Channel identifier number.