AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 792 / 1248

User's Manual 792 Document #: LTRT-10375
Mediant 500 MSBR
407,638007,Fred,frede,8142
408,638008,Maggie,maggiea,9807
48.7.3 User Information File for SBC User Database
You can use the SBC User Info table for the following:

Registering each user to an external registrar server.

Authenticating (for any SIP request and as a client) each user if challenged by an
external server.

Authenticating as a server incoming user requests (for SBC security).
If the device registers on behalf of users and the users do not perform registration, any SIP
request destined to the user is routed to the Proxy Set associated with the user’s IP Group.
You can configure up to 500 users (table rows) in the SBC User Info table. The SBC User
Info table can be configured using any of the following methods:

Web interface - see Configuring SBC User Info Table through Web Interface on page
792

CLI - see Configuring SBC User Info Table through CLI on page 794

Loadable User Info file - see Configuring SBC User Info Table in Loadable Text File
on page 794
48.7.3.1 Configuring SBC User Info Table through Web Interface
The following procedure describes how to configure the SBC User Info table through the
Web interface.
Note:
•
To configure the User Info table, make sure that you have enabled the feature, as
described in Enabling the User Info Table on page 787.
•
If you load any User Info file to the device, all previously configured entries are
removed from the table in the Web interface and replaced with the entries from the
loaded User Info file.

To configure the SBC User Info table through the Web interface:
1. Open the SBC User Info table ( Setup menu > Signaling & Media tab > SBC folder >
User Information ).