AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 932 / 1248

User's Manual 932 Document #: LTRT-10375
Mediant 500 MSBR
specific configuration entity from the filter. For example, to include all IP
Groups in the filter except IP Group ID 2, configure the 'Filter Type'
parameter to
IP Group and the 'Value' parameter to "!2" (without
apostrophes). Note that for SBC calls, a Logging Filter rule applies to
the entire session, which is both legs (i.e., not per leg). For example, a
call between IP Groups 1 and 2 are logged for both legs even if the
'Value' parameter is configured to "!2".

Any to indicate all.
Note:

You can use the index number or string name to specify the
configuration entity for the following 'Filter Types': Tel-to-IP, IP-to-Tel,
IP
Group , SRD , Classification , IP-to-IP Routing , or SIP Interface . For
example, to specify IP Group at Index 2 with the name "SIP Trunk",
configure the parameter to either "2" or "SIP Trunk" (without
apostrophes).

For IP trace expressions, see Filtering IP Network Traces on page 933.
Log Destination
log-dest
[LoggingFilters_Log
Destination]
Defines where the device sends the log file.

[0] Syslog Server = The device generates Syslog messages based on
the configured log filter and sends them to a user-defined Syslog server.
The Syslog messages can contain one of the following types of
information, depending on the settings of the 'Log Type' parameter
(described later):

Not configured (default): Syslog messages include regular syslog
information.

CDR Only: Syslog messages include only CDRs (no system
information and alerts).

[1] Debug Recording Server = (Default) The device generates debug
recording packets based on the configured log filter and sends them to
a user-defined Debug Recording server.

[2] Local Storage = The device generates CDRs based on the
configured log filter and stores them locally on the device. For more
information on local CDR storage, see Storing CDRs on the Device on
page 915.
Note:

If the 'Filter Type' parameter is configured to IP Trace , you must
configure the parameter to Debug Recording Server .

If you configure the parameter to Local Storage, you must configure the
'Log Type' parameter to CDR Only.

If you configure the parameter to Syslog Server and the debug level
(GwDebugLevel) is configured to No Debug (see Configuring Syslog
Debug Level on page 941), the Syslog messages include only system
Warnings and Errors.

If you configure the parameter to Debug Recording Server , you can
also include Syslog messages in the debug recording packets sent to
the debug recording server. To include Syslog messages, configure the
'Log Type' parameter (see below) to the relevant option.
Log Type
log-type
[LoggingFilters_Capt
ureType]
Defines the type of messages to include in the log file.

[0] = (Default) Not configured. The option is applicable only for sending
Syslog messages to a Syslog server (i.e., 'Log Destination' parameter is
configured to
Syslog Server ).

[1] Signaling = The option is applicable only to debug recording (i.e.,
'Log Destination' parameter is configured to
Debug Recording Server ).
The debug recording includes signaling information such as SIP
signaling messages, Syslog messages, CDRs, and the device's internal