AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 492 / 1248

User's Manual 492 Document #: LTRT-10375
Mediant 500 MSBR
Parameter Description
Serving IP Group
serving-ip-group
[TrunkGroupSettings_Serv
ingIPGroupName]
Assigns an IP Group to where the device sends INVITE messages
for calls received from the Trunk Group. The actual destination to
where the INVITE messages are sent is according to the Proxy Set
associated with the IP Group. The Request-URI host name in the
INVITE and REGISTER messages (except for 'Per Account'
registration modes) is set to the value of the 'SIP Group Name'
parameter configured in the IP Groups table (see Configuring IP
Groups on page 333).
Note:

If the parameter is not configured, the INVITE messages are sent
to the default Proxy or according to the Tel-to-IP Routing table
(see Configuring Tel-to-IP Routing Rules on page 495).

If the PreferRouteTable parameter is set to 1 (see Configuring
Proxy and Registration Parameters on page 369), the routing
rules in the Tel-to-IP Routing table take precedence over the
selected Serving IP Group ID.
MWI Interrogation Type
mwi-interrogation-type
[TrunkGroupSettings_MWI
InterrogationType]
Defines message waiting indication (MWI) QSIG-to-IP interworking
for interrogating MWI supplementary services.

[255] Not configured.

[0] None = Disables the feature.

[1] Use Activate Only = MWI Interrogation messages are not sent
and only "passively" responds to MWI Activate requests from the
PBX.

[2] Result Not Used = MWI Interrogation messages are sent, but
the result is not used. Instead, the device waits for MWI Activate
requests from the PBX.

[3] Use Result = MWI Interrogation messages are sent, its results
are used, and the MWI Activate requests are used. MWI Activate
requests are interworked to SIP NOTIFY MWI messages. The SIP
NOTIFY messages are sent to the IP Group defined by the
NotificationIPGroupID parameter.
Note: The parameter appears in the table only if the
VoiceMailInterface parameter is set to 3 (QSIG) (see Configuring
Voice Mail on page 595).
Status
Admin State (Read-only) Displays the administrators state:

"Locked": The Lock command has been chosen from the Action
drop-down button.

"Unlocked": The Unlock command has been chosen from the
Action drop-down button.
Status (Read-only) Displays the current status of the trunks/channels in the
Trunk Group:

"In Service": Indicates that all channels in the Trunk Group are in
service, for example, when the Trunk Group is unlocked or Busy
Out state cleared (see the EnableBusyOut parameter for more
information).

"Going Out Of Service": Appears as soon as you choose the Lock
command and indicates that the device is starting to lock the
Trunk Group and take channels out of service.

"Going Out Of Service (<duration remaining of graceful period>
sec / <number of calls still active> calls)": Appears when the