AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 256 / 1248

User's Manual 256 Document #: LTRT-10375
Mediant 500 MSBR
4. Configure an HTTP remote host according to the parameters described in the table
below.
5. Click Apply , and then save your settings to flash memory.
Table 18-15: HTTP Remote Hosts Table Parameter Descriptions
Parameter Description
Index
rest-servers
[HTTPRemoteHosts_Rem
oteHostindex]
Defines an index number for the new table row.
Note:

Each row must be configured with a unique index.

The parameter is mandatory.
Name
[HTTPRemoteHosts_Nam
e]
Defines a descriptive name, which is used when associating the row in
other tables.
The valid value is a string of up to 40 characters. By default, no value
is defined.
Note:

Each row must be configured with a unique name.

The parameter is mandatory.
Address
rest-address
[HTTPRemoteHosts_Addr
ess]
Defines the address (IP address or FQDN) of the remote host.
The valid value is a string of up to 80 characters.
Note:

An IPv6 address can only be configured if the interface is a
CONTROL type.

If the address is an FQDN and the DNS resolution results in
multiple IP addresses, the device device attempts to establish
multiple connections (sessions) for each IP address. Only the first
10 resolved IP addresses are used regardless of the number of
hosts.

FQDN resolution is also performed (immediately) when connection
is subsequently "closed" (by timeout or by the remote host) and
connections are updated accordingly. In addition, the device
periodically (every 15 minutes) performs DNS name resolution to
ensure that the list of resolved IP addresses has not changed. If a
change is detected, the device updates its' list of IP addresses and
re-establishes connections accordingly.

In addition to multiple HTTP sessions, the device establishes
multiple (TCP) connections per session, thereby enhancing data
exchange capabilities with the host.
Port
rest-port
[HTTPRemoteHosts_Port]
Defines the port of the host.
The valid value is 0 to 65535. The default is 80.
Interface
rest-interface
[HTTPRemoteHosts_Interf
ace]
Assigns one of the device's IP network interfaces through which
communication with the remote host is done.
By default, no value is defined and the OAMP interface is used.
Transport Type
rest-transport-type
[HTTPRemoteHosts_HTTP
TransportType]
Defines the protocol for communicating with the remote host:

[0] HTTP (default)

[1] HTTPS