AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1126 / 1248

User's Manual 1126 Document #: LTRT-10375
Mediant 500 MSBR

[3] DRSN

[5] UC

[7] CUC
Note:

If the ISDN message contains a Precedence IE, the device
automatically interworks the "network identity" digits in the IE to the
network domain subfield in the Resource-Priority header. For more
information, see Multilevel Precedence and Preemption on page
583.

The parameter is applicable only to digital interfaces.
[ResourcePriorityNetwork
Domains] Defines up to 32 user-defined MLPP network domain names
(namespaces). This value is used in the AS-SIP Resource-Priority
header of the outgoing SIP INVITE request. The parameter is used in
combination with the MLPPDefaultNamespace parameter, where you
need to enter the table row index as its value.
The parameter is also used for mapping the Resource-Priority field
value of the SIP Resource-Priority header to the ISDN Precedence
Level IE. The mapping is configured by the field,
EnableIp2TelInterworking:

Disabled: The network-domain field in the Resource-Priority header
is set to "0 1 0 0" (i.e., "routine") in the Precedence Level field.

Enabled: The network-domain field in the Resource-Priority header
is set in the Precedence Level field according to Table 5.3.2.12-4
(Mapping of RPH r-priority Field to ISDN Precedence Level Value).
The domain name can be a string of up to 10 characters.
The format of this table ini file parameter is as follows:
FORMAT ResourcePriorityNetworkDomains_Index =
ResourcePriorityNetworkDomains_Name,
ResourcePriorityNetworkDomains_EnableIp2TelInterworking;
ResourcePriorityNetworkDomains 1 = dsn, 0;
ResourcePriorityNetworkDomains 2 = dod, 0;
ResourcePriorityNetworkDomains 3 = drsn, 0;
ResourcePriorityNetworkDomains 5 = uc, 1;
ResourcePriorityNetworkDomains 7 = cuc, 0;
[ \ResourcePriorityNetworkDomains ]
Note:

Indices 1, 2, 3, 5, and 7 cannot be modified and are defined for DSN,
DOD, DRSN, UC, and CUC, respectively.

If the MLPPDefaultNamespace parameter is set to -1, interworking
from PSTN NI digits is done automatically.

The parameter is applicable only to digital interfaces.
Default Call Priority
dflt-call-prio
[SIPDefaultCallPriority]
Determines the default call priority for MLPP calls.

[0] 0 = (Default) ROUTINE

[2] 2 = PRIORITY

[4] 4 = IMMEDIATE

[6] 6 = FLASH

[8] 8 = FLASH-OVERRIDE

[9] 9 = FLASH-OVERRIDE-OVERRIDE
If the incoming SIP INVITE request doesn't contain a valid priority value
in the SIP Resource-Priority header, the default value is used in the
Precedence IE (after translation to the relevant ISDN Precedence
value) of the outgoing ISDN Setup message.