AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1051 / 1248

Version 7.2 1051 Mediant 500 MSBR
User's Manual 74. Configuration Parameters Reference
60/3 is 30, and 90 minus 30 is 60).
The valid range is 0 to 32 (in seconds). The default is 32.
Session Expires Method
configure voip > gateway
settings > session-exp-
method
[SessionExpiresMethod]
Defines the SIP method used for session-timer updates.

[0] Re-INVITE = (Default) Uses re-INVITE messages for session-
timer updates.

[1] UPDATE = Uses UPDATE messages.
Note:

The parameter is applicable only to the Gateway application.

The device can receive session-timer refreshes using both methods.

The UPDATE message used for session-timer is excluded from the
SDP body.
[RemoveToTagInFailureR
esponse] Determines whether the device removes the ‘to’ header tag from final
SIP failure responses to INVITE transactions.

[0] = (Default) Do not remove tag.

[1] = Remove tag.
[EnableRTCPAttribute] Enables the use of the 'rtcp' attribute in the outgoing SDP.

[0] = Disable (default)

[1] = Enable
Note: The parameter is applicable only to the Gateway application.
[OPTIONSUserPart] Defines the user part value of the Request-URI for outgoing SIP
OPTIONS requests. If no value is configured, the endpoint number
(analog) or configuration parameter ‘Username’ value (digital) is used.
A special value is ‘empty’, indicating that no user part in the Request-
URI (host part only) is used.
The valid range is a 30-character string. By default, this value is not
defined.
Trunk Status Reporting
Mode
configure voip > gw
digitalgw digital-gw-
parameters > trunk-
status-reporting
[TrunkStatusReportingMo
de]
Enables the device to not respond to received SIP OPTIONS messages
from, and/or not to send keep-alive messages to, a proxy server
associated with Trunk Group ID 1 if all its member trunks are down.

[0] Disable (default) = Device responds to SIP OPTIONS messages
from, and sends keep-alive messages to, a proxy server associated
with Trunk Group ID 1 if all its member trunks are down.

[1] Don’t reply OPTIONS = The device does not respond to SIP
OPTIONS received from the proxy associated with Trunk Group 1
when all its trunks are down.

[2] Don’t send Keep-Alive = The device does not send keep-alive
messages to the proxy associated with Trunk Group 1 when all its
trunks are down.

[3] Don’t Reply and Send = Both options [1] and [2] are applied.
Note:

The parameter is only applicable to digital interfaces.

When the parameter is set to not respond to SIP OPTIONS received
from the proxy, it is applicable only if the OPTIONS message does
not include a user part in the Request-URI.

The proxy server is determined by the Proxy Set that is associated
with the Serving IP Group defined for the Trunk Group in the Trunk
Group Settings table.
TDM Over IP Minimum
Calls For Trunk Activation Defines the minimal number of SIP dialogs that must be established
when using TDM Tunneling, for the specific trunk to be considered