AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 678 / 1248

User's Manual 678 Document #: LTRT-10375
Mediant 500 MSBR

[3] SUBSCRIBE

[4] INVITE and REGISTER

[5] INVITE and SUBSCRIBE

[6] OPTIONS
Source Username Prefix
src-user-name-prefix
[IP2IPRouting_SrcUserna
mePrefix]
Defines the prefix of the user part of the incoming SIP dialog's source
URI (usually the From URI). You can use special notations for denoting
the prefix. To denote calls without a user part in the URI, use the $ sign.
For available notations, see Dialing Plan Notation for Routing and
Manipulation on page 979.
The default is the asterisk (*) symbol (i.e., any prefix). If this rule is not
required, leave this field empty.
Note: If you need to route calls of many different source URI user
names to the same destination, you can use tags (see 'Source Tags'
parameter below) instead of this parameter.
Source Host
src-host
[IP2IPRouting_SrcHost]
Defines the host part of the incoming SIP dialog's source URI (usually
the From URI).
The default is the asterisk (*) symbol (i.e., any host name). If this rule is
not required, leave this field empty.
Source Tags
src-tags
[IP2IPRouting_SrcTags]
Assigns a tag to denote source URI user names corresponding to the
tag configured in the associated Dial Plan.
The valid value is a string of up to 20 characters. The tag is case
insensitive.
To configure tags, see Configuring Dial Plans on page 711.
Note:

Make sure that you assign the Dial Plan in which you have
configured the tag, to the related IP Group or SRD.

Instead of using tags and configuring the parameter, you can use the
'Source Username Prefix' parameter to specify a specific URI source
user or all source users.
Destination Username
Prefix
dst-user-name-prefix
[IP2IPRouting_DestUsern
amePrefix]
Defines the prefix of the incoming SIP dialog's destination URI (usually
the Request URI) user part. You can use special notations for denoting
the prefix. To denote calls without a user part in the URI, use the $ sign.
For available notations, see Dialing Plan Notation for Routing and
Manipulation on page 979.
The default is the asterisk (*) symbol (i.e., any prefix). If this rule is not
required, leave this field empty.
Note: If you need to route calls of many different destination URI user
names to the same destination, you can use tags (see 'Source Tags'
parameter below) instead of this parameter.
Destination Host
dst-host
[IP2IPRouting_DestHost]
Defines the host part of the incoming SIP dialog’s destination URI
(usually the Request-URI).
The default is the asterisk (*) symbol (i.e., any destination host). If this
rule is not required, leave this field empty.
Destination Tags
dest-tags
[IP2IPRouting_DestTags]
Assigns a prefix tag to denote destination URI user names
corresponding to the tag configured in the associated Dial Plan.
The valid value is a string of up to 20 characters. The tag is case
insensitive.
To configure prefix tags, see Configuring Dial Plans on page 711.
Note:

Make sure that you assign the Dial Plan in which you have
configured the prefix tag, to the related IP Group or SRD.