AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 991 / 1248

Version 7.2 991 Mediant 500 MSBR
User's Manual 74. Configuration Parameters Reference
[ChassisPhysicalAlias] Defines the 'alias' name object for the physical entity as specified
by a network manager, and provides a non-volatile 'handle' for
the physical entity.
The valid range is a string of up to 255 characters.
[ChassisPhysicalAssetID] Defines the user-assigned asset tracking identifier object for the
device's chassis as specified by an EMS, and provides non-
volatile storage of this information.
The valid range is a string of up to 255 characters.
[ifAlias] Defines the textual name of the interface. The value is equal to
the ifAlias SNMP MIB object.
The valid range is a string of up to 64 characters.
configure system > snmp trap >
auto-send-keep-alive
[SendKeepAliveTrap]
Enables the device to send NAT keep-alive traps to the port of
the SNMP network management station (e.g., AudioCodes EMS).
This is used for NAT traversal, and allows SNMP communication
with AudioCodes EMS management platform, located in the
WAN, when the device is located behind NAT. It is needed to
keep the NAT pinhole open for the SNMP messages sent from
EMS to the device. The device sends the trap periodically - every
9/10 of the time configured by the NATBindingDefaultTimeout
parameter. The trap that is sent is acKeepAlive. For more
information on the SNMP trap, refer to the
SNMP Reference
Guide .

[0] = (Default) Disable

[1] = Enable
To configure the port number, use the KeepAliveTrapPort
parameter.
Note: For the parameter to take effect, a device reset is required.
[KeepAliveTrapPort] Defines the port of the SNMP network management station to
which the device sends keep-alive traps.
The valid range is 0 - 65534. The default is port 162.
To enable NAT keep-alive traps, use the SendKeepAliveTrap
parameter.
[PM_EnableThresholdAlarms] Enables the sending of the SNMP trap event,
acPerformanceMonitoringThresholdCrossing which is sent every
time the threshold (high and low) of a Performance Monitored
object (e.g.,
acPMMediaRealmAttributesMediaRealmBytesTxHighThreshold)
is crossed.

[0] = (Default) Disable

[1] = Enable
configure system > snmp
settings > sys-oid
[SNMPSysOid]
Defines the SNMP MIB OID for the base product system.
The default is 1.3.6.1.4.1.5003.8.1.1.
Note:

For the parameter to take effect, a device reset is required.

The device automatically adds the device’s unique product
identifier number at the end of your OID.