AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1144 / 1248

User's Manual 1144 Document #: LTRT-10375
Mediant 500 MSBR
[CASTablesNum] Defines how many CAS protocol configurations files are loaded.
The valid range is 1 to 8.
Note: For the parameter to take effect, a device reset is required.
CAS State Machines Parameters
Note: To configure the CAS State Machine table using the Web interface, see Configuring CAS
State Machines on page 465. The CAS state machine can be configured only through the Web-
based management tool.
Generate Digit On Time
[CASStateMachineGenerateDi
gitOnTime]
Generates digit on-time (in msec).
The value must be a positive value. The default is -1.
Generate Inter Digit Time
[CASStateMachineGenerateInt
erDigitTime]
Generates digit off-time (in msec).
The value must be a positive value. The default is -1.
DTMF Max Detection Time
[CASStateMachineDTMFMaxO
nDetectionTime]
Detects digit maximum on time (according to DSP detection
information event) in msec units.
The value must be a positive value. The default is -1.
DTMF Min Detection Time
[CASStateMachineDTMFMinO
nDetectionTime]
Detects digit minimum on time (according to DSP detection
information event) in msec units. The digit time length must be
longer than this value to receive a detection. Any number may be
used, but the value must be less than
CasStateMachineDTMFMaxOnDetectionTime.
The value must be a positive value. The default is -1.
MAX Incoming Address Digits
[CASStateMachineMaxNumOfI
ncomingAddressDigits]
Defines the limitation for the maximum address digits that need to
be collected. After reaching this number of digits, the collection of
address digits is stopped.
The value must be an integer. The default is -1.
MAX Incoming ANI Digits
[CASStateMachineMaxNumOfI
ncomingANIDigits]
Defines the limitation for the maximum ANI digits that need to be
collected. After reaching this number of digits, the collection of
ANI digits is stopped.
The value must be an integer. The default is -1.
Collect ANI
[CASStateMachineCollectANI]
In some cases, when the state machine handles the ANI
collection (not related to MFCR2), you can enable the state
machine to collect ANI or discard ANI.

[0] No = Don't collect ANI.

[1] Yes = Collect ANI.

[-1] Default = Default value.
Digit Signaling System
[CASStateMachineDigitSignali
ngSystem]
Defines which Signaling System to use in both directions
(detection\generation).

[0] DTMF = DTMF signaling.

[1] MF = (Default) MF signaling.

[-1] Default = Default value.
74.10.6.4 ISDN Parameters
The ISDN parameters are described in the table below.