AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 501 / 1248

Version 7.2 501 Mediant 500 MSBR
User's Manual 27. Routing
Parameter Description
Registration Accounts on page 363).

To configure Proxy Sets, see Configuring Proxy Sets on page 348.
SIP Interface
dest-sip-interface-
name
[PREFIX_DestSIPInt
erfaceName]
Assigns a SIP Interface to the routing rule. The call is sent to its' destination
through this SIP interface.
To configure SIP Interfaces, see Configuring SIP Interfaces on page 325.
Note: If a SIP Interface is not assigned, the device uses the SIP Interface
associated with the default SRD (Index 0). If, for whatever reason, you have
deleted the default SRD and there are no SRDs, the call is rejected.
Destination IP
Address
dst-ip-address
[PREFIX_DestAddre
ss]
Defines the IP address (in dotted-decimal notation or FQDN) to where the
call is sent. If an FQDN is used (e.g., domain.com), DNS resolution is done
according to the DNSQueryType parameter.
The IP address can include the following wildcards:

"x": represents single digits. For example, 10.8.8.xx denotes all addresses
between 10.8.8.10 and 10.8.8.99.

"*": represents any number between 0 and 255. For example, 10.8.8.*
denotes all addresses between 10.8.8.0 and 10.8.8.255.
For ENUM-based routing, enter the string "ENUM". The device sends an
ENUM query containing the destination phone number to an external DNS
serverconfigured for the associated network interface. The ENUM reply
includes a SIP URI which is used as the Request-URI in the subsequent
outgoing INVITE and for routing (if a proxy is not used). To configure the type
of ENUM service (e.g., e164.arpa), see the EnumService parameter.
For LDAP-based routing, enter the string "LDAP" to denote the IP address of
the LDAP server. For more information, see Active Directory-based Routing
for Microsoft Skype for Business on page 238.
Note:

The parameter is ignored if you have configured a destination IP Group in
the 'Destination IP Group' field (in this table).

To reject calls, enter the IP address 0.0.0.0. For example, if you want to
prohibit international calls, then in the 'Destination Phone Prefix' field,
enter 00 and in the 'Destination IP Address' field, enter 0.0.0.0.

For routing calls between phones connected to the device (i.e., local
routing), enter the device's IP address. If the device's IP address is
unknown (e.g., when DHCP is used), enter IP address 127.0.0.1.

When using domain names, enter the DNS server's IP address or
alternatively, configure these names in the Internal DNS table (see
Configuring the Internal DNS Table on page 151).
IP Profile
ip-profile-id
[PREFIX_ProfileNam
e]
Assigns an IP Profile to the routing rule in the outgoing direction. The IP
Profile allows you to assign various configuration attributes (e.g., voice
coder) per routing rule. To configure IP Profiles, see Configuring IP Profiles
on page 404.
If you do not configure the parameter, the device uses the following IP
Profile:

If an IP Group is configured for the destination ('Destination IP Group'
parameter), the device uses the IP Profile associated with the IP Group.

If no IP Group is configured, the device uses IP Profile 0
Destination Port
dst-port
[PREFIX_DestPort]
Defines the destination port to where you want to route the call.