AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1041 / 1248

Version 7.2 1041 Mediant 500 MSBR
User's Manual 74. Configuration Parameters Reference
Gateway Registration
Name
configure voip > sip-
definition settings > gw-
registration-name
[GWRegistrationName]
Defines the user name that is used in the From and To headers in SIP
REGISTER messages. If no value is specified (default) for the
parameter, the UserName parameter is used instead.
Note:

The parameter is applicable only to the Gateway application.

The parameter is applicable only for single registration per device
(i.e., AuthenticationMode is set to 1). When the device registers each
channel separately (i.e., AuthenticationMode is set to 0), the user
name is set to the channel's phone number.
Registration Mode
configure voip > sip-
definition settings >
authentication-mode
[AuthenticationMode]
Determines the device's registration and authentication method.

[0] Per Endpoint = Registration and authentication is performed
separately for each endpoint/B-channel. This is typically used for
FXS interfaces, where each endpoint registers (and authenticates)
separately with its user name and password.

[1] Per Gateway = (Default) Single registration and authentication for
the entire device. This is typically used for FXO interfaces and digital
modules.

[3] Per FXS = Registration and authentication for FXS endpoints.
Note: The parameter is applicable only to the Gateway application.
Set Out-Of-Service On
Registration Failure
configure voip > sip-
definition proxy-and-
registration > set-oos-on-
reg-failure
[OOSOnRegistrationFail]
Enables setting the endpoint, trunk, or entire device (i.e., all endpoints)
to out-of-service if registration fails.

[0] Disable (default)

[1] Enable
If the registration is per endpoint (i.e., AuthenticationMode is set to 0) or
per Account (see Configuring Trunk Group Settings on page 487) and a
specific endpoint/Account registration fails (SIP 4xx or no response),
then that endpoint is set to out-of-service until a success response is
received in a subsequent registration request. When the registration is
per the entire device (i.e., AuthenticationMode is set to 1) and
registration fails, all endpoints are set to out-of-service. If all the
Accounts of a specific Trunk Group fail registration and if the Trunk
Group comprises a complete trunk, then the entire trunk is set to out-of-
service.
Note:

The parameter is applicable only to the Gateway application.

The out-of-service method is configured using the FXSOOSBehavior
parameter.
configure voip > sip-
definition settings > expl-
un-reg
[UnregistrationMode]
Enables the device to perform explicit unregisters.

[0] Disable (default)

[1] Enable = The device sends an asterisk ("*") value in the SIP
Contact header, instructing the Registrar server to remove all
previous registration bindings. The device removes SIP User Agent
(UA) registration bindings in a Registrar, according to RFC 3261.
Registrations are soft state and expire unless refreshed, but they can
also be explicitly removed. A client can attempt to influence the
expiration interval selected by the Registrar. A UA requests the
immediate removal of a binding by specifying an expiration interval
of "0" for that contact address in a REGISTER request. UA's should
support this mechanism so that bindings can be removed before
their expiration interval has passed. Use of the "*" Contact header
field value allows a registering UA to remove all bindings associated
with an address-of-record (AOR) without knowing their precise