AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 162 / 1248

User's Manual 162 Document #: LTRT-10375
Mediant 500 MSBR
Proxy Set ID
proxy-set
[IDSMatch_ProxySet]
Assigns a Proxy Set(s) to the IDS Policy. This indicates the Proxy
Sets from where the attacks are coming from. The following syntax
is supported:

A comma-separated list of Proxy Set IDs (e.g., 1,3,4)

A hyphen "-" indicates a range of Proxy Sets (e.g., 3,4-7 means
IDs 3, and 4 through 7)

A prefix of an exclamation mark "!" means negation of the set
(e.g., !3,4-7 means all indexes excluding 3, and excluding 4
through 7)
Note:

Only the IP address of the Proxy Set is considered (not port).

If a Proxy Set has multiple IP addresses, the device considers
the Proxy Set as one entity and includes all its IP addresses in
the same IDS count.
Subnet
subnet
[IDSMatch_Subnet]
Defines the subnet to which the IDS Policy is assigned. This
indicates the subnets from where the attacks are coming from. The
following syntax can be used:

Basic syntax is a subnet in CIDR notation (e.g., 10.1.0.0/16
means all sources with IP address in the range 10.1.0.0–
10.1.255.255)

An IP address can be specified without the prefix length to refer
to the specific IP address.

Each subnet can be negated by prefixing it with "!", which means
all IP addresses outside that subnet.

Multiple subnets can be specified by separating them with "&"
(and) or "|" (or) operations. For example:

10.1.0.0/16 | 10.2.2.2: includes subnet 10.1.0.0/16 and IP
address 10.2.2.2.

!10.1.0.0/16 & !10.2.2.2: includes all addresses except those
of subnet 10.1.0.0/16 and IP address 10.2.2.2. Note that the
exclamation mark "!" appears before each subnet.

10.1.0.0/16 & !10.1.1.1: includes subnet 10.1.0.0/16, except
IP address 10.1.1.1.
Policy
policy
[IDSMatch_Policy]
Assigns an IDS Policy (configured in Configuring IDS Policies on
page 156).
16.2.4 Viewing IDS Alarms
For the IDS feature, the device sends the following SNMP traps:

Traps that notify the detection of malicious attacks:
•
acIDSPolicyAlarm: The device sends this alarm whenever a threshold of a
specific IDS Policy rule is crossed. The trap displays the crossed severity
threshold (Minor or Major), IDS Policy and IDS Rule, and the IDS Policy-Match
index.
•
acIDSThresholdCrossNotification: The device sends this event for each scope
(IP address) that crosses the threshold. In addition to the crossed severity
threshold (Minor or Major) of the IDS Policy-Match index, this event shows the IP
address (or IP address:port) of the malicious attacker.
If the severity level is raised, the alarm of the former severity is cleared and the
device sends a new alarm with the new severity. The alarm is cleared after a