AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 289 / 1248

Version 7.2 289 Mediant 500 MSBR
User's Manual 18. Services
Skype for Business users' SIP URIs (see Configuring LDAP Servers on page 220).
7. Configure Call Setup Rules to perform LDAP queries in the Microsoft Active Directory
for the SIP URI of the caller (source) and called (destination) parties (see Configuring
Call Setup Rules on page 372). The device first needs to search the AD for the caller
or called number of the third-party endpoint device. For example, to search for a called
mobile number, the searched LDAP Attribute would be "mobile" set to the value of the
destination number (e.g., '' + param.call.dst.user). If the entry exists, the
query searches for the Attribute (e.g., ipPhone) where the SIP URI is defined for the
corresponding mobile user. If found, the query returns the Attribute's value (i.e., URI)
to the device (instructed using the special 'Condition' string "presence.dst" or
"presence.src"). This is the URI that the device uses as the Request-URI in the
PUBLISH message that it sends to the Skype for Business Server. The configuration
of the example used in this step is shown below:
Parameter Rule 1 Rule 2
Query Type LDAP LDAP
Search Key '' + param.call.dst.user '' + param.call.src.user
Attributes To Get ipPhone ipPhone
Condition ldap.attr.ipPhone exists
ldap.attr.ipPhone exists
Action Subject presence.dst presence.src
Action Type Add Add
Action Value ldap.attr.ipPhone ldap.attr.ipPhone
8. Configure routing rules to route the calls in the network.
9. For SBC calls: Configure IP Groups to represent your call party entities, and assign
them the group of Call Setup Rules (Set ID) that you configured in Step 7 (above). For
configuring IP Groups, see Configuring IP Groups on page 333. For Gateway calls:
Assign the group of Call Setup Rules (Set ID) that you configured in Step 7 (above) to
your Tel-to-IP Routing rules (see Configuring Tel-to-IP Routing Rules on page 495).