AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 396 / 1248

User's Manual 396 Document #: LTRT-10375
Mediant 500 MSBR

To configure a Coder Group:
1. Open the Coder Groups table ( Setup menu > Signaling & Media tab > Coders &
Profiles folder > Coder Groups ).
Figure 23-1: Coder Group Table
2. From the 'Coder Group Name' drop-down list, select the desired Coder Group index
number and name.
3. Configure the Coder Group according to the parameters described in the table below.
4. Click Apply , and then reset the device with a save-to-flash for your settings to take
effect.
You can delete a Coder Group, as described in the following procedure.

To delete a Coder Group:
1. From the 'Coder Group Name' drop-down list, select the Coder Group that you want to
delete.
2. Click Delete Group .
Table 23-1: Coder Groups Table Parameter Descriptions
Parameter Description
Coder Group Name
[AudioCodersGroups_Index]
[AudioCodersGroups_Name]
Defines the name and index for the Coder Group.
Note: The Coder Group index/name cannot be configured.
[AudioCoders_AudioCodersIndex
] Index row of the coder per Coder Group
Note: The parameter is applicable only to the ini file.
Coder Name
name
[AudioCoders_Name]
Defines the coder type. For coder names, see Supported Audio
Coders on page 397.
Note: Each coder type (e.g., G.729) can be configured only once
in the table.
Packetization Time
p-time
[AudioCoders_pTime]
Defines the packetization time (in msec) for the coder. The
packetization time determines how many coder payloads are
combined into a single RTP packet. For ptime, see Supported
Audio Coders on page 397.
Rate
rate
Defines the bit rate (in kbps) for the coder. For rates, see
Supported Audio Coders on page 397.