AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1115 / 1248

Version 7.2 1115 Mediant 500 MSBR
User's Manual 74. Configuration Parameters Reference
[\FwdInfo]
Where,

Module = Module number, where 1 denotes the module in Slot 1.

Port = Port number, where 1 denotes Port 1 of a module.
For example:

Below configuration forwards calls originally destined to Port 1 of
Module 1 to "1001" upon On Busy:
FwdInfo 0 = 1,1001,30,1,1;

Below configuration forwards calls originally destined to Port 2 of
Module 1 to an IP address upon On Busy:
FwdInfo 1 = 1,2003@10.5.1.1,30,1,2;
For more information, see Configuring Call Forward on page 606.
Note: The parameter is applicable only to analog interfaces.
Call Forward Reminder Ring Parameters
Note:

These parameters are applicable only to FXS interfaces.

For a description of this feature, see Call Forward Reminder Ring on page 561.
Enable NRT
Subscription
configure voip >
gateway dtmf-supp-
service supp-service-
settings > nrt-
subscription
[EnableNRTSubscriptio
n]
Enables endpoint subscription for Ring reminder event notification feature.

[0] Disable (default)

[1] Enable
AS Subscribe
IPGroupID
configure voip >
gateway dtmf-supp-
service supp-service-
settings > as-subs-
ipgroupid
[ASSubscribeIPGroupID
]
Defines the IP Group ID that contains the Application server for
Subscription.
The valid value range is 1 to 8. The default is -1 (i.e., not configured).
NRT Subscribe Retry
Time
configure voip >
gateway dtmf-supp-
service supp-service-
settings > nrt-sub-retry-
time
[NRTSubscribeRetryTi
me]
Defines the Retry period (in seconds) for Dialog subscription if a previous
request failed.
The valid value range is 10 to 7200. The default is 120.
Call Forward Ring Tone
ID
configure voip >
gateway dtmf-supp-
service supp-service-
settings > cfe-ring-tone-
Defines the ringing tone type played when call forward notification is
accepted.
The valid value range is 1 to 5. The default is 1.