AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 224 / 1248

User's Manual 224 Document #: LTRT-10375
Mediant 500 MSBR
LDAP Bind DN
bind-dn
[LdapConfiguration_Lda
pConfBindDn]
Defines the LDAP server's bind Distinguished Name (DN) or username.

LDAP-based SIP queries: The DN is used as the username during
connection and binding to the LDAP server. The DN is used to
uniquely name an AD object. Below are example parameter settings:

cn=administrator,cn=Users,dc=domain,dc=com

administrator@domain.com

domain\administrator

LDAP-based user login authentication: The parameter represents the
login username entered by the user during a login attempt. You can
use the $ (dollar) sign in this value to enable the device to
automatically replace the $ sign with the user's login username in the
search filter, which it sends to the LDAP server for authenticating the
user's username-password combination. An example configuration for
the parameter is $@sales.local, where the device replaces the $ with
the entered username, for example, JohnD@sales.local. The
username can also be configured with the domain name of the LDAP
server.
Note: By default, the device sends the username in clear-text format.
You can enable the device to encrypt the username using TLS (see the
'Use SSL' parameter below).
Management Attribute
mgmt-attr
[LdapConfiguration_Mng
mAuthAtt]
Defines the LDAP attribute name to query, which contains a list of groups
to which the user is a member. For Active Directory, this attribute is
typically "memberOf". The attribute's values (groups) are used to
determine the user's management access level; the group's
corresponding access level is configured in Configuring Access Level per
Management Groups Attributes on page 226.
Note:

The parameter is applicable only to LDAP-based login authentication
and authorization (i.e., the 'Type' parameter is set to
Management ).

If this functionality is not used, the device assigns the user the
configured default access level. For more information, see
Configuring Access Level per Management Groups Attributes on
page 226.
18.3.5 Configuring LDAP DNs (Base Paths) per LDAP Server
The LDAP Search DN table lets you configure LDAP base paths. The table is a "child" of
the LDAP Servers table (see Configuring LDAP Servers on page 220) and configuration is
done per LDAP server. For the device to run a search using the LDAP service, the base
path to the directory’s subtree, referred to as the distinguished name object (or DN), where
the search is to be done must be configured. For each LDAP server, you can configure up
to three base paths.
The following procedure describes how to configure DNs per LDAP server through the
Web interface. You can also configure it through ini file (LdapServersSearchDNs) or CLI
(configure system > ldap ldap-servers-search-dns).

To configure an LDAP base path per LDAP server:
1. Open the LDAP Servers table ( Setup menu > IP Network tab > RADIUS & LDAP
folder > LDAP Servers ).
2. In the table, select the row of the LDAP server for which you want to configure DN
base paths, and then click the
LDAP Servers Search Based DNs link located below
the table; the LDAP Server Search Base DN table opens.