AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 212 / 1248

User's Manual 212 Document #: LTRT-10375
Mediant 500 MSBR
Server on page 213. The procedure is applicable to both RADIUS-based user
authentication and RADIUS-based accounting.
Note: The Vendor ID must be the same as the Vendor ID set on the third-party
RADIUS server. See the example for setting up a third-party RADIUS server in
Setting Up a Third-Party RADIUS Server on page 213.

To configure the RADIUS Vendor ID:
1. Open the Authentication Server page ( Setup menu > Administration tab > Web &
CLI folder > Authentication Server ).
Figure 18-7: Configuring RADIUS Vendor ID
2. Under the RADIUS group, in the 'RADIUS VSA Vendor ID' field, enter the same
vendor ID number as set on the third-party RADIUS server.
3. Click Apply .
18.2.6 RADIUS-based Management User Authentication
You can enhance security for your device by implementing Remote Authentication Dial-In
User Service (RADIUS - RFC 2865) for authenticating multiple management user accounts
of the device’s embedded Web and Telnet (CLI) servers. Thus, RADIUS also prevents
unauthorized access to your device.
When RADIUS authentication is not used, the user's login username and password are
locally authenticated by the device using the Local Users table (see Configuring
Management User Accounts on page 71). However, you can configure the device to use
the Local Users table as a fallback mechanism if the RADIUS server does not respond.