AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 338 / 1248

User's Manual 338 Document #: LTRT-10375
Mediant 500 MSBR
Parameters on page 369).

The parameter overrides inbound message manipulation rules that
manipulate the host name in Request-URI, To, and/or From SIP
headers. If you configure the parameter and you want to manipulate
the host name in any of these SIP headers, you must apply your
manipulation rule (Manipulation Set ID) to the IP Group as an
Outbound Message Manipulation Set (see the
IPGroup_OutboundManSet parameter), when the IP Group is the
destination of the call. If you apply the Manipulation Set as an
Inbound Message Manipulation Set (see the
IPGroup_InboundManSet parameter), when the IP Group is the
source of the call, the manipulation rule is overridden by the SIP
Group Name parameter.

If the IP Group is of User type, the parameter is used internally as a
host name in the Request-URI for Tel-to-IP initiated calls. For
example, if an incoming call from the device's trunk is routed to a
User-type IP Group, the device first creates the Request-URI
(<destination_number>@<SIP Group Name>), and then it searches
the registration database for a match.
Created By Routing
Server
[IPGroup_CreatedByRouti
ngServer]
(Read-only) Indicates whether the IP Group was created by a third-party
routing server:

[0] No

[1] Yes
For more information on the third-party routing server feature, see
Centralized Third-Party Routing Server on page 257.
Used By Routing Server
used-by-routing-server
[IPGroup_UsedByRouting
Server]
Enables the IP Group to be used by a third-party routing server for call
routing decisions.

[0] Not Used (default)

[1] Used
For more information on the third-party routing server feature, see
Centralized Third-Party Routing Server on page 257.
Proxy Set Connectivity
show voip proxy sets
status
[IPGroup_ProxySetConne
ctivity]
(Read-only field) Displays the connectivity status with Server-type IP
Groups. As the Proxy Set defines the address of the IP Group, the
connectivity check (keep-alive) by the device is done to this address.

"NA": Functionality is not applicable due to one of the following:

User-type IP Group.

Server-type IP Group, but the keep-alive mechanism of its'
associated Proxy Set is disabled.

"Not Connected": Keep-alive failure (i.e., no connectivity with the IP
Group).

"Connected": Keep-alive success (i.e., connectivity with the IP
Group).
The connectivity status is also displayed in the Topology View page (see
Building and Viewing SIP Entities in Topology View on page 356).
Note:

The feature is applicable only to Server-type IP Groups.

To support the feature, you must enable the keep-alive mechanism of
the Proxy Set that is associated with the IP Group (see Configuring
Proxy Sets on page 348).

If the Proxy Set is configured with multiple proxies (addresses) and at
least one of them is "alive", the displayed status is "Connected". To
view the connected proxy server, see Viewing Proxy Set Status on
page 868.