AudioCodes Mediant 500 MSBR, Руководство пользователя

Страница: 1199 / 1248

Version 7.2 1199 Mediant 500 MSBR
User's Manual 74. Configuration Parameters Reference

[2] User Failed = CPN set by user, and verification failed.

[3] Network Provided = CPN set by network.
Note:

The parameter is applicable only if the Remote Party ID (RPID)
header is enabled.

The parameter is applicable only to digital interfaces.
Send Screening Indicator to
ISDN
[ScreeningInd2ISDN]
Overrides the screening indicator of the calling party's number for IP-to-
Tel ISDN calls.

[-1] Not Configured = (Default) Not configured (interworking from IP
to ISDN).

[0] User Provided = user provided, not screened.

[1] User Passed = user provided, verified and passed.

[2] User Failed = user provided, verified and failed.

[3] Network Provided = network provided
Note: The parameter is applicable only to digital interfaces.
Copy Destination Number to
Redirect Number
cp-dst-nb-2-redir-nb
[CopyDest2RedirectNumber
]
Enables the device to copy the called number (from the received ISDN
message for digital interfaces) to the outgoing SIP Diversion header for
Tel-to-IP calls (even if a Redirecting Number IE is not received in the
ISDN Setup message for digital interfaces). Therefore, the called
number is used as a redirect number. Call redirection information is
typically used for Unified Messaging and voice mail services to identify
the recipient of a message.

[0] Don't copy = (Default) Disable.

[1] Copy after phone number manipulation = Copies the called
number after manipulation. The device first performs Tel-to-IP
destination phone number manipulation (i.e., on the SIP To header),
and only then copies the manipulated called number to the SIP
Diversion header for the Tel-to-IP call. Therefore, with this option,
the called and redirect numbers are identical.

[2] Copy before phone number manipulation = Copies the called
number before manipulation. The device first copies the original
called number to the SIP Diversion header, and then performs Tel-
to-IP destination phone number manipulation. Therefore, this allows
you to have different numbers for the called (i.e., SIP To header) and
redirect (i.e., SIP Diversion header) numbers.
Note:

For digital interfaces: If the incoming ISDN-to-IP call includes a
Redirect Number, this number is overridden by the new called
number if the parameter is set to [1] or [2].

For digital interfaces: You can also use this feature for IP-to-Tel
calls, by configuring the parameter per IP Profile
(IpProfile_CopyDest2RedirectNum). For more information, see
Configuring IP Profiles on page 404.
configure voip > sip-
definition settings > rep-
calling-w-redir
[ReplaceCallingWithRedirec
tNumber]
Enables the replacement of the calling number with the redirect number
for ISDN-to-IP calls.

[0] = Disable (default)

[1] = The calling name is removed and left blank. The outgoing
INVITE message excludes the redirect number that was used to
replace the calling number. The replacement is done only if a
redirect number is present in the incoming Tel call.

[2] = Manipulation is done on the new calling party number (after
manipulation of the original calling party number, using the